If you aren’t familiar with alt bars, they’re a unique type of mountain bike handlebar that’s designed for long-distance riding. These comfortable handlebars offer a broad variety of hand positions, riding postures, and accessory mounting points. Most of these bars will provide some extra steering leverage for better control over your loaded bike too.

To make sure you properly understand upright riding positions, backsweep angles, backward reach, grip design, handlebar material and much more – make sure to first read my complete guide to finding the most comfortable alt bars HERE.

Right, let’s dive straight into the best alt bars currently available.

The Best Alt Bars For Bikepacking and Touring

The alt bars listed below are in order from largest to smallest backsweep.

• Best For Varied Hand Positions: Velo Orange Crazy Bars
• Best For Comfort and Speed: KOGA Denham Bars
• Best For Frames With A Short Reach: Surly Moloko
• Best For Maximum Control: Tumbleweed Persuader
• Best For High Rise: Ritchey Comp Buzzard
• Best For Value For Money: Ritchey Kyote
• Best For Most Mountain Bikers: Salsa Bend Deluxe
• Best For Shock Absorption: Passchier Gump 760
• Best For New Alt Bar Users: Soma Dream Lowdown
• Best For Lightweight Design: SQlab 311 FL-X Carbon
• Best For Aero Loop: Satori Falcon Aero
• Best For High Rise & Small Backsweep: Cannondale Cruise Control
• Best For Drop Bar Conversions: Curve Remlaw

Note: I may earn a commission when you purchase a handlebar through my links. This directly supports CYCLINGABOUT and allows me to continue to provide high-quality cycling information to you.

Velo Orange Crazy Bars V2

Best For Varied Hand Positions

Backsweep: 35-degrees
Width: 780 mm
Rise: 40mm (1.6″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 532g (18.8 oz)

$109 at Amazon

The Velo Orange Crazy Bars use a 35-degree backsweep angle and a long backward reach. This means it will best suit the most upright of riding positions.

Velo Orange touts their second version of the Crazy Bars as “intended for touring on paved and unpaved roads, single and double track, gravel and crushed limestone, and everything in between”. As this handlebar is almost identical to the handlebar I designed myself (KOGA Denham Bars), I have to say – I agree with this assessment!

The 780mm width provides excellent control and leverage on rough surfaces, while the bullhorn section offers an aerodynamic position for smoother roads and headwinds.

If you don’t feel the need for the bullhorns, the Velo Orange Seine Bar is the same design, minus the bullhorns.

KOGA Denham Bars

Best For Control and Speed

Backsweep: 34-degrees
Width: 711 mm
Rise: None
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 400g (14.1oz)

€120 at Vakantiefietser

I designed the KOGA Denham Bars for world bicycle travellers. The shape was inspired by the Crazy Bars V1, and I suspect the KOGA Denham Bars then informed the later-released Crazy Bars V2.

The KOGA Denham Bars offer lots of control over a loaded bike, there are many hand positions for comfort, and the bullhorns allow you to be more aerodynamic in headwinds. The bullhorns essentially mimic the hoods of a drop bar, making them a nice spot to hold on faster rides.

A great thing about these bars is that they fit bikepacking bags, large handlebar bags, and randonneur bags and baskets.

While this handlebar is certainly similar to the Crazy Bars, it features less rise, less width, shorter grip sections, and a slightly smaller backsweep angle. This makes it a bit better in urban areas. I typically recommend fitting these bars to bikes with the handlebars level with the stem (at a minimum).

While I use and love these handlebars, they are unfortunately the most difficult to purchase on this list due to the small-scale manufacturing and international shipping costs. Don’t worry, I won’t be offended if you choose the Velo Orange Crazy Bars instead!

You can read my in-depth article about the KOGA Denham Bars and their design HERE.

Surly Moloko

Best For Upright Frames With A Short Reach

Backsweep: 34-degrees
Width: 735 mm
Rise: None
Stem Clamp: 31.8mm
Material: Steel
Weight: 709g (25oz)

$110 at Jenson USA

The Surly Moloko might look similar to the above handlebars, but in terms of backward reach, it couldn’t be more different. This handlebar swoops a long way forward before starting its backsweep, resulting in almost no backward reach.

This design quirk makes the Moloko especially suitable for drop bar conversions, and for those who are seeking a large backsweep without making their ride position more upright. It also means you can ride mountain bike trails without risking your bars slipping.

The Moloko features a loop that gives you some more hand positions and additional space for mounting accessories. You can even get handlebar bags that nest perfectly inside the loop; I have a bunch listed in this resource. That said, when you install a bag you lose some hand positions and possibly even some accessory mounting points.

Tumbleweed Persuader 30

Best For Maximum Control

Backsweep: 31-degrees
Width: 800/840mm
Rise: 50mm (2″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 411g (14.5oz)

$115 at Campfire Cycling

The Tumbleweed Persuader is the widest alt bar featured in this resource, and this provides maximum control over your loaded bike. They have a lot of backward reach and slightly less backsweep than the previous bars we’ve seen. The 50mm rise should make the Persuador especially well-suited to low front-end bikes.

You can get these bars in aluminium or steel. I think the aluminium ones are the pick as they’re quite lightweight for a tough adventure bar, plus the 160mm wide, 31.8mm clamp area is a great space for bikepacking gadgets.

You can also get the Persuader with a 20-degree backsweep. This will be ideal if your bars are not super upright, or you’re not ready to commit to a large backsweep angle just yet.

Ritchey Comp Buzzard

Best For High Rise Design

Backsweep: 27.5-degrees
Width: 820mm
Rise: 70mm (2.8″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 367g (13.0oz)

$58 at Amazon

If you want a more upright ride position without the long backward reach of the Tumbleweed Persuader, you cannot beat the Ritchey Comp Buzzard. This bar is wide like the Persuader but thanks to its short backward reach, it won’t make your bike feel any smaller.

This bar can turn old mountain bikes (with a low front end) into mile-munching touring or bikepacking machines.

The Ritchey Comp Buzzard has a nice wide centre section to accommodate various bags and accessories. It’s built lightweight thanks to the double-butted aluminium and it even comes in at a great price.

Ritchey Kyote

Best For Value For Money

Backsweep: 27.5-degrees
Width: 800mm
Rise: 35mm (1.4″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 355g (12.5oz)

$44 at Amazon

Ritchey also has other great comfort MTB handlebars such as this one – the Ritchey Kyote. This alt bar is essentially a low-rise version of the Comp Buzzard, so it offers a short backward reach too.

The Kyote is perfect for those who are looking to maintain a lower ride position and will be great for drop bar bike conversions too. The best bit is that it’s only US $44.

Whisky Scully

Best For Moderate Backsweep Angle

Backsweep: 23-degrees
Width: 820mm
Rise: 20mm (0.8″)
Stem Clamp: 31.8mm
Material: Carbon
Weight: 237g (8.4oz)

$180 at Amazon

If you’re a bit of a gram counter, but still want some backsweep – you’ll love the Whisky Scully. This handlebar is one-third of the weight of the Surly Moloko, thanks to its carbon construction.

It’s still ISO tested for bumpy terrain and would be a great upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond.

The 23-degree backsweep is now getting closer to the common shape of a city bike handlebar. It has a moderate backward reach, and moderate rise too.

Passchier Gump 760

Best For Shock Absorption

Backsweep: 22-degrees
Width: 650/760mm
Rise: None
Stem Clamp: 31.8mm
Material: Bamboo
Weight: 330g (11.6 oz)

$225 at Passchier

Bamboo offers greater natural flex than traditional handlebar materials. These are the most flexible handlebars I’ve ever ridden. They flex so much up and down that you can actually see them moving underneath you (check out this video).

This flex isolates your upper body from shock and vibration coming up from the road or trail and helps your eyeballs to rattle a bit less in your skull. The great thing is that despite all this flex, they still pass ISO fatigue and strength testing.

The Passchiers are made from laminated bamboo with a carbon fibre sleeve in the middle for the stem clamp. You can get them in two different widths, and they offer a modest 22-degree backsweep angle.

Soma Dream Lowdown

Best For New Alt Bar Users

Backsweep: 20-degrees
Width: 780mm
Rise: 25mm (1″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 425g (15oz)

$99 at Amazon

The Soma Dream Lowdown is an alt bar with less backsweep and backward reach than most. As this bar has moderate dimensions all around, I think it’s a really good starting point for those who are alt bar curious!

The bar is still quite wide, giving you a whole lot of control over your loaded bike. And the 25mm rise makes it suitable for those chasing a slightly higher bar height than what they currently have.

These aluminium alt bars are lightweight for a tough adventure bar, plus the wide section at the front of the bar provides ample space for lights, smartphones, and GPS devices.

Salsa Bend Deluxe

Best For Most Mountain Bikers

Backsweep: 17/23-degrees
Width: 710/740mm
Rise: None
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 309g (10.9 oz)

$78 at Jenson USA

The Salsa Bend Deluxe is an MTB-specific flat bar that’s available with a moderate 17 or 23-degree backsweep angle. They’re tough, strong and durable, and great for long days of bikepacking, touring, or shredding singletrack.

The Bend Deluxe offers a very short backward reach to preserve your stem length, meaning that when you fit these comfortable MTB handlebars to your bike, the reach to the bars will likely end up in the right ballpark.

Go for the 17-degree model if your bars are lower than your saddle, or you want to give alt bars a try without committing to a large backsweep. Try the 23-degree model if your bars sit a bit taller.

SQlab 311 FL-X Carbon

Best For Ultralight Design

Backsweep: 12/16-degrees
Width: 740 mm
Rise: 15, 30mm
Stem Clamp: 31.8mm
Material: Carbon
Weight: 198g (6.9 oz)

$339 at Amazon

SQlab has built its name on comfort. Their research suggests that a cyclist’s wrists are overstretched on any flat bar with less than a 9-degree backsweep angle…

That’s why the SQlab 311 FL-X handlebars offer a generous 12 or 16-degree backsweep angle, and with a longer backward reach than most bars in the MTB category, they provide a more upright riding position too.

The 311 FL-X bars have been designed to flex more than most handlebars, and this will result in a super comfortable ride on both rough roads and trails.

And at under 200 grams, the SQlab 311 FL-X handlebars are also the lightest on this list.

Satori Falcon Aero

Best For Aero Loop

Backsweep: 15-degrees
Width: 740mm
Rise: None
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 504g (1.1lb)

$44 on Amazon

The Satori Faclon Aero combines the loop design of other alt bars with one of the more conservative backsweep angles on this list. As a result, it shouldn’t feel too different from a standard mountain bike bar. While it doesn’t have any rise, there are ample hand positions for comfort.

The loop adds space for luggage storage, and accessories (phone, GPS, lights etc), as well as an aero hand position. The loop is a similar size to other alt handlebars, allowing it to fit bags made for Jones and Surly bars.

Cannondale Cruise Control

Best For High Rise & Low Backsweep Angle

Backsweep: 15-degrees
Width: 740mm
Rise: 100mm (4″)
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 433g (1.7lb)

$67 at Amazon

If you’re after a whole bunch of rise with a more familiar backsweep angle, you’ll be best off with handlebars that feature a reinforcing crossbar. The Cannondale Cruise Control is a retro-inspired cruiser bar, trail bar, comfort bar, and BMX bar all rolled into one!

The best bit about the Cannondale Cruise Control is that it’s lightweight aluminium (rather than steel) and uses a regular 31.8mm stem clamp, unlike many handlebars of this moto design.

Curve Remlaw

Best For Drop Bar Conversions

Backsweep: 12-degrees
Width: 800mm
Rise: None
Stem Clamp: 31.8mm
Material: Aluminium
Weight: 400g (14.1 oz)

$99 at Curve Cycling

The Remlaw Bar is the only handlebar here with a forward reach design!

Curve essentially wanted to create a flat bar that could be used in place of a drop bar, yet still have comparable reach without compromising handling.

When converting from a drop bar to the Remlaw Bar, the same length stem can be used as it puts your hands in a very similar position in space.

Best Alt Bars Summary

• Bike Gear
• Gear

The 13 Best Alt Bars For Bikepacking and Touring (Comfortable MTB Handlebars)

byAlee Denham

November 30, 2024

• Bike Gear
• Gear

How To Choose The Most Comfortable Alt Bars For Bikepacking & Touring

byAlee Denham

November 30, 2024

• Bike Gear
• Gear

Flat Bars Are Better Than Drop Bars For Most People (Objective Analysis)

byAlee Denham

August 21, 2021

• Bike Gear
• Gear

4 New Bikepacking Products That You Need To Know About

byAlee Denham

March 31, 2021

• Bike Gear
• Gear

Bikepacking Aero Bars: Increase Your Comfort And Speed On Your Bike Adventures

byAlee Denham

December 7, 2019

• Bike Gear
• Gear

Comparing The KOGA Denham Bar Shape With Similar Alt Bars

byAlee Denham

August 2, 2019

The post The 13 Best Alt Bars For Bikepacking and Touring (Comfortable MTB Handlebars) appeared first on CYCLINGABOUT.com.

Alt bars are a type of handlebars that are designed specifically for long-distance cycling. They typically offer a broad variety of hand positions, riding postures, and accessory mounts. In addition, you’ll gain extra steering leverage for better control over your loaded bike.

Alt bars are suitable for those who are touring on paved and dirt roads, along 4×4 tracks, down singletrack trails, through unkept fields, and across everything in between.

With the varied hand positions of these handlebars, you’ll not only get to change the pressure points in your hands throughout the day, but you’ll activate different muscles in your arms and back too. Alt bars ultimately help you to look after your body on long rides.

• Bike Gear
• Gear

The 13 Best Alt Bars For Bikepacking and Touring (Comfortable MTB Handlebars)

byAlee Denham

November 30, 2024

A comfortable alt bar setup might even give you the power to cycle more miles, recover quicker, and enjoy more of the scenery while riding.

Many of the alt bars I recommend in this article HERE will help you achieve a more upright riding position. This is usually accomplished by reducing the distance between your saddle and the grips via large backsweep angles, a long backward reach, and a tall handlebar rise – you’ll learn about these terms in a moment!

Alright, let’s find out how to choose the most comfortable alt bars for bikepacking and touring.

Upright Riding Positions

The first thing you need to consider is how upright your riding posture is, and whether it would be beneficial to set your grips even higher.

Your core muscles fatigue on long rides, so most people end up putting more weight onto their hands as the hours go on. By increasing your handlebar height, you can keep the load on your hands at an acceptable level.

In addition, a more upright riding posture usually reduces strain on the neck, shoulders and back, and you tend to look around more at your surroundings.

The primary downside of an upright posture is a less aerodynamic riding position, but you can still rocket along if you fit some aero bars onto your alt bars (highly recommended).

A great starting point for a comfortable alt bar setup is setting your handlebar level with your saddle. You can do this by selecting a bar with a tall rise. If a tall bar setup is new to you, make sure to give it some time for your body to adapt as it might feel a bit strange at the start.

It’s worth noting taller riders will often tolerate a lower handlebar compared to shorter riders as they have longer limbs relative to their torso length. Riders with a strong core tend to also tolerate a lower bar. That said, individual variations exist, and not everyone fits these general patterns.

And a downstream effect of fitting taller bars is that you might also need to swap to a more padded saddle (as you now have more weight on your butt!).

Ok, you should now have a good idea about handlebar height, so let’s discuss the ideal backsweep angle.

Alt Bar Backsweep Angle

Alt bars use larger backsweep angles than typical MTB handlebars. This helps to preserve the natural wrist position of a more upright riding position, reducing finger numbness (which often arises from overstretching your wrist).

I consider:
Small backsweep angles to be 5 to 12 degrees <- almost all MTB bars
Moderate backsweep angles to be 12 to 25 degrees
Large backsweep angles to be 25 to 35 degrees

It’s instantly noticeable going from a flat MTB bar with a 5-12 degree backsweep angle to the 20+ degree backsweep angles of most alt bars.

The perfect backsweep is determined primarily by your ride posture, but also core strength, grip choice, and glove choice. There’s a healthy dose of personal preference in there too.

The more upright and relaxed your body posture, the more backsweep angle you will likely find comfortable. This is because your elbows will naturally pull in closer to your body, changing both your wrist angle and the interaction between your hands and grips.

Conversely, smaller backsweep angles generally suit lower, performance-oriented body postures as your elbows naturally sit wider (see animation above).

If you were to use a large backsweep angle with a low riding posture you’ll likely find your hands naturally want to rest diagonally over your grips, creating pressure points on your palms.

Here are my backsweep angle starting points:

• 5 to 15° will feel most comfortable if your handlebar is lower than your saddle
• 15 to 25° will feel most comfortable if your handlebar is around the same height as your saddle
• 25 to 35° will feel most comfortable if your handlebar is significantly higher than your saddle

If you’re not sure where to land, I’d recommend starting with a bit less backsweep angle, rather than more. The 15 to 25° range is a great start.

Alt Bar Rise

To achieve a comfortable setup for long-distance riding, you should also consider using alt bars with extra rise, which will allow you to sit a bit more upright.

Handlebar rise is measured from the centre of the handlebar to the bar end. Some bars in this resource have zero millimetres of rise and others have over 100mm of rise (4″).

Additional bar height can also be achieved via your stem or by using a steerer extender.

Keep in mind that the ideal backsweep angle will likely need to increase along with the bar height.

Alt Bar Width

Wider handlebars provide additional steering leverage. This results in better control over heavy-loaded bikes on rough trails.

But wide bars also make splitting traffic, getting through doorways, and riding in tight singletrack more difficult. I’ve found that 700 to 730mm is my sweet spot between bike control and travel practicality. But if I spent less time in urban areas, I would likely prefer something closer to 800mm.

Please note that you can cut down all handlebars to size; manufacturers will usually have a minimum recommended width. Just make sure there is enough space on the grip sections to install your shifter(s) and brakes where you like them first – 200mm is about as short as you can practically go.

Also, keep in mind that wider alt bars increase the effective distance to the bars from the saddle. This means you might need to compensate by using a shorter stem or fitting a bar with a long backward reach…

Backward Reach

A handlebar with a large backsweep angle usually brings your handlebars closer to your body, putting you in a more upright ride position. But it isn’t always the case!

You also need to look at the handlebar’s overall design to determine whether it has a long or short backward reach. Does it swoop forward before starting its backsweep like the Surly Moloko, or swoop backward right from the stem clamp like the KOGA Denham Bars?

Handlebars with a long backward reach (eg. KOGA Denham) will put you in a more upright position by reducing the distance from your saddle to your grips. Conversely, handlebars with a short backward reach (eg. Surly Moloko) will allow you to maintain a body position similar to a flat bar.

One important thing to note about long backward reach handlebars: they are not suitable for all mountain bike trails. This is because they can slip and rotate in the stem clamp after a big impact (eg. rock drop). That said, I regularly ride on singletrack; I just make sure to avoid jumps or drops that could cause my bars to slip.

Alt Bar Stem Length

The length of the backward reach also needs to be considered along with your stem length.

To a large degree, you can use stem length to place your grips in the perfect location. But this might require changing your stem length by 30 to 60mm, depending on what riding position you’re looking to achieve.

In some circumstances, you might need to use an especially long stem to get your grips in the ideal position. For example, if you want to fit a handlebar with a long backward reach to a drop bar frame, a 130 or 140mm stem might be required.

Alt Bars and Frame Design

Another thing to consider is the handlebar design that will best pair with your frame.

A flat bar frame (like a mountain bike) is usually the best option for a handlebar with a long backward reach. This is because flat bar frames are usually longer than drop bar frames (by ~50mm), so they will likely accommodate a handlebar with a large backsweep angle and long backward reach.

A drop bar frame (like a road bike) is usually the best candidate for a handlebar with additional forward reach. This is because drop bar frames are usually shorter than flat bar frames, so you’ll want some forward reach to make sure the grips aren’t too close to your body.

Alt Bars For Drop Bar Frames

The most suitable alt bars for a drop bar frame either have a small backward reach or none at at.

There are also alt bars that have been designed specifically for drop bar conversions. These unique handlebars have a large forward reach, allowing you to place your hands slightly in front of the stem clamp.

The Curve Remlaw preserves the hand position of a drop bar without requiring a different length stem. They might even save you a bit of money as you might not need to buy a longer stem.

WhatBars Comparison Tool

A really cool tool for comparing alt bars is WhatBars.

You’ll find many handlebar options in there. Simply select a few bars and the tool will allow you to visualise and compare their geometry and grip locations.

Fitting Inner Bar Ends To Alt Bars

If you like the idea of the ‘bullhorn’ hand position found on the Crazy Bars or Denham Bars, you can find component manufacturers that create clip-on versions.

This hand position is not only more aerodynamic, but it puts different pressure through your hands, and changes the load through your wrists, arms, back and neck.

An internal study by SQlab showed that these inner bar ends can save 14 watts of power output at a speed of 36 km/h (280 watts). This is simply because these inner hand holds put your body in a more aerodynamic riding position.

The Soma Bar Ins Extensions are a great choice as you can choose your clamp location, extension length, and even the inward and upward tilt angles. There is a short (95mm) and long (150mm) bullhorn available.

The Bar Ins clamps angle the extensions inward about 25°, so the extensions would stick straight out on a 25° backsweep alt bar. If you wanted to match the 7° inward bullhorn angle of the Denham Bars, you would need to find an alt bar with an 18° backsweep angle.

Spirgrips are a more performance-oriented product that’s designed to sit next to your grips. They are much shorter and lighter than Soma Bar Ins and are shaped to cup your hands well. They are angled inward to ensure your wrists engage with your bars at a suitable angle.

The SQlab Innerbarends 410 2.0 are another great option, and these best fit right next to your grips. A cool feature is that you can integrate them directly with the lock-on SQlab grips, removing one of the grip clamps. The only downside is that compared to the Bar Ins, you’ll have less ability to tune the angles.

You can, of course, use any regular bar ends too. The only downside is that they’re not usually designed for sweptback handlebars so you might find they angle outwards rather than inwards.

Alt Bar Materials

Alt bar manufacturers offer a broad range of materials including aluminium, steel, titanium, carbon and even bamboo.

The best alt bars for most riders are made from aluminium, which balances cost, weight, comfort, and durability in equal measure. However, other materials are becoming increasingly common in alt bars for various reasons.

To generalise:
– Steel alt bars are known for their durability but they’re heavy
– Carbon handlebars are strong and lightweight but they’re less forgiving to crashes and rough transit
– Titanium handlebars are durable and lightweight but also quite expensive

I’ve listed a bamboo model in my best alt bars article as I found it to have a shocking amount of compliance built in. You can see it deflect a couple of centimetres just by pushing down on it – there is a video of this flex in my article.

Alt Bar Grips

Your grip choice is arguably just as important as the alt bar itself.

One of my top recommendations for alt bar grips is thick silicone grips. These super soft grips will not only damp vibration coming up from the road or trail but conform nicely to your hands.

My two favourite silicone grips are the Wolf Tooth Fat Paw lock-on and ESI Extra Chunky.

My other recommendation is grips with a shaped design. These grips have been optimised for large backsweep angles, which allows your hands and wrists to sit at a very natural angle. These grip designs also often have a ridge in the middle that cups inside your palm, and a rearward wing that distributes hand pressure across a larger surface area.

Look out for the Ergon GC1, XLC GR-S22 or SQlab 710 for an extra comfortable design on a handlebar with lots of backsweep angle.

Handlebars and Bags

And lastly, make sure to think about how your luggage will integrate with the bars you choose.

A wide straight section next to the stem is ideal for mounting bikepacking handlebar packs (eg. Revelate) and touring handlebar bags (eg. Ortlieb). Alt bars with shapes that sweep forward before starting their backsweep can especially create clearance issues with wider bags.

You’ll notice that some of these handlebars feature a loop. This provides more hand positions and space for accessories, and can also serve as a small front rack.

Summary

Now that you have a good idea about everything alt bars, it’s time to head over to my article that features the 13 Best Alt Bars For Bikepacking and Touring.

I’ve narrowed down the best alt bar picks with varying backsweep angles, rises, and more. With multiple options at the US $50 price point, you should find something in your budget and for your needs.

• Bike Gear
• Gear

The 13 Best Alt Bars For Bikepacking and Touring (Comfortable MTB Handlebars)

byAlee Denham

November 30, 2024

• Bike Gear
• Gear

How To Choose The Most Comfortable Alt Bars For Bikepacking & Touring

byAlee Denham

November 30, 2024

• Bike Gear
• Gear

Flat Bars Are Better Than Drop Bars For Most People (Objective Analysis)

byAlee Denham

August 21, 2021

• Bike Gear
• Gear

4 New Bikepacking Products That You Need To Know About

byAlee Denham

March 31, 2021

• Bike Gear
• Gear

Bikepacking Aero Bars: Increase Your Comfort And Speed On Your Bike Adventures

byAlee Denham

December 7, 2019

• Bike Gear
• Gear

Comparing The KOGA Denham Bar Shape With Similar Alt Bars

byAlee Denham

August 2, 2019

The post How To Choose The Most Comfortable Alt Bars For Bikepacking & Touring appeared first on CYCLINGABOUT.com.

This is all the gear I need to live and work in any country, and it’s optimised for both liveability and durability. I’ve made sure to highlight all my favourite items throughout!

I hope you can use my gear list to get an idea of (a) what to bring on a long-distance bike trip, and (b) what equipment is proven to be the most durable over multiple years of use.

You can find the specific product names of my equipment, the actual weights, and links to the items right HERE.

Timestamps

0:00 – Intro
2:47 – Electronics
4:23 – Camping Gear
7:37 – Clothing
8:56 – Shoes & Accessories
10:44 – Cooking Gear
12:30 – Cooking Accessories
13:47 – Bike Luggage
14:55 – Travel Essentials
16:09 – Toiletries
17:25 – Tools & Spares
19:13 – Summary

The post What I Pack For Bike Touring After 170,000km Around The World (Video) appeared first on CYCLINGABOUT.com.

Today, I’ll be showing you the bike touring gear list for my open-ended bicycle trip. This is all the gear I need to live and work in any country in the world, and it’s optimised for both liveability and durability.

In many ways, my bicycle journey is the ultimate test bed for equipment. Few people use their gear day-in, day-out for years at a time, let alone in weather conditions from arid to monsoonal, in temperatures ranging between -20C to +50C, and at altitudes spanning -400m to 6,000m elevation.

As a result, I’ve broken more gear than you can imagine!

Whenever I break something, my personal policy is to replace it with something tougher. This has put me in a position where breakages are now highly unusual. The gear you see laid out below has well and truly proven itself in the field.

The total weight of all my gear is 24 kilograms or 53 pounds, and that includes the clothes and shoes I’m wearing as I type this. This might sound like a lot, but I use everything, am comfortable, and can trust my gear in remote pockets of the world.

Despite the weight, my average cycling speed is still perfectly adequate. I often find myself exceeding 100km (62mi) per day if the roads are not too rough or mountainous.

A few final notes on my gear. You’ll notice I’m carrying many items that are shared with my partner Laura. I simply carry more weight than her to balance out our cycling speeds. Our gear also changes depending on the season. When it’s cold we carry the appropriate clothes and shoes for the conditions.

Right, let’s take a close look at everything in my bags.

Please note: I may earn a small commission if you purchase gear through the links in this article. This directly supports CYCLINGABOUT.com and allows me to continue providing high-quality cycling information to you!

Bike Touring Gear List: Electronics

Electronics Highlights:

My electronics setup has changed a lot over the last decade.

I’ve been lugging around Apple Macbook Pro laptops for the majority of the time. These computers have been exposed to endless off-road conditions, as well as extreme temperatures (-20 to +50 Celsius). I’m always surprised that they survive through all the sudden impacts on trails, as well as through bumpy road corrugations. One laptop even survived a 30-metre (100ft) fall off a cliff in Peru! Macbooks are more rugged than you can imagine, are powerful enough for video editing, and have a great battery life.

I’ve previously used high-end camera equipment that allows for incredibly cinematic films – think DSLR cameras, big zoom lenses and drones. However, while I was stuck in Mexico during COVID, my YouTube channel pivoted to more of a tech focus (rather than travel documentaries). As a result, I’ve pared back my camera gear.

I’m using a Canon SX740 HS camera with a big zoom for animal and landscape video. My iPhone 13 Pro is what I use for mid-distance, and I have an Insta360 X4 camera mounted to the handlebars for point-of-view shots.

I’m still working out the 360 camera but I think I’m onto something here! You can record in all directions, and later choose the direction(s) you want to export the footage in. It also allows you to record interactions with people without shoving a lens in their face.

I use an old iPhone SE for navigation, as I don’t want to have an expensive phone mounted to my handlebars (theft, dust etc).

Camping Gear

Camping Gear Highlights:

I’m really happy with my camping setup. Laura and I camp 150+ nights per year, so we need our shelter to be durable, good for all weather conditions and spacious.

Our Mont Dragonfly tent fits the bill perfectly. It’s a roomy 2-person tent with big nylon panels that keep you warm when it’s cold, and they can be zipped away to reveal breathable mesh for warm conditions. The floor is notably durable, and it’s green, which allows us to hide pretty well in the foliage. The only downside is the door zips, which we have worn out in less than six months in gritty desert conditions – we simply replace them when they no longer work perfectly.

I really like my Marmot Trestles sleeping bag. It’s durable and warm for its weight. It uses a synthetic fill so it’s easy to machine wash (my last down bag was SUCH a hassle), it’s better in humid conditions, and there are no escaping feathers. Laura has the same bag that allows us to zip together when it’s cold.

My Sea To Summit Comfort Plus mat is nothing short of incredible. Sure, it’s way bigger and bulkier than most, but my previous mat lasted over 1000 nights of use over six years. It’s also the most comfortable mat I’ve used, it’s warm (4.0 R-value), it isn’t saggy, and it doesn’t make a crunchy sound when you roll over. It has two separate air chambers, which allow you to run the bottom chamber firm but keep it soft and supple on top if that’s what you like. The dual air chambers also give you a redundancy chamber if you puncture one side.

I prefer foam pillows. They are super soft, machine washable and not able to be punctured. The Exped DeepSleep pillow is a thickness I like, and I use a compression strap to keep it together.

The Crazy Creek Hex 2.0 chair is a new addition. Again, it’s not small or light, but it’s comfortable and I can take it off my bike and sit in it in 10 seconds flat! We primarily use them throughout the day while taking breaks, but we also use them inside the tent (which you can’t do with tall chairs that have legs). We place them under our mattresses when the ground is a bit thorny and use them as changing/showering mats. These chairs are great!

Clothing

Clothing Highlights:

The best cycling underwear I’ve found is the Uniqlo AIRism Ultra Seamless. They are lightweight, breathable and have no seams on the butt, which is important when you ride without padded cycling shorts. Yep, I cycle without a chamois! This is possible when you use an adequately soft saddle with a shape that suits your riding position, and hip bone width.

I’m a big long-sleeve cycling shirt fan. It protects my skin from harmful UV rays and allows me to use much less sun cream. I’ve used many brands over the years, but my overwhelming favourites are the Mont Venture shirt and Patagonia Self-Guided Hike shirt. They feel great on the skin and fit my long, skinny frame better than most.

I wear long cycling pants when it’s not too hot and humid. Again, you protect your skin from sun damage, keep your body clean(er), and use significantly less sun cream. The Rapha Trail Lightweight pants are breathable and last about 8-9 months before I wear holes in the butt. I just get patches sewn over the top after that.

Shoes & Accessories

Shoes & Accessories Highlights:

Forget safety vests, rear vision mirrors are the number one way to cycle safely on the road. This is because you can quickly assess if passing vehicles will give you adequate space, and get out of their way if they’re coming too close.

I’ve been using Trieye sunglasses for two years now, and am impressed with the integrated rear-vision mirror. Sure, it’s not quite as effective as a large handlebar-mounted mirror, but it’s compact, doesn’t vibrate, is always perfectly adjusted, and doesn’t quite look as dorky as a clip-on sunglasses mirror. I can’t imagine riding without these sunglasses anymore!

I also love my Cleverhood Rover poncho that clips over my handlebars keeping my upper body and legs dry. Unless it’s freezing, waterproof jackets are simply not ‘breathable’ for cycling applications – you usually just end up getting sweaty inside them. Ponchos, on the other hand, are genuinely breathable as the wind blows under them, keeping you cool in warmer conditions. Just keep in mind they’re not suitable in super windy conditions!

I’m currently testing Bedrock Cairn 3D sandals with some grippy flat pedals, and so far, so good! The Cairns were picked primarily for their soles, which are notably grippy and durable. Even after a few months of daily use, I’m seeing very little wear.

Cooking Gear

Cooking Gear Highlights:

My MSR Whisperlite International stove needs a special mention. I’ve been using this stove since I was a teenager, and it has stuck with me through years of bike travel. It gets lit around 500 times per year, which means I’ve probably started it over 7,000 times! This stove runs on any fuel but I primarily use petrol as it’s available everywhere. It does run better/cleaner on kerosene though…

The MSR 2.5 Litre Nonstick Ceramic pot is amazing. It’s durable, easy to clean, big enough for two people, and great for salads. My last pot made it a full decade before it got a bit shabby. Just make sure to put anything nesting inside in a bag to protect the non-stick surface. The MSR DeepDish bowls are a perfect fit. They’re also a nice size for big breakfasts and dinners.

Don’t waste your time using any knife but the Victorinox Table knife. This cheap knife is unbelievably sharp for its price and will remain this sharp for years. It’s perfect for cutting everything from butternut pumpkins to tomatoes. Just watch your fingers…

Cooking Accessories

Cooking Accessories Highlights:

I’ve used all kinds of water filters over the years, and I keep coming back to the Sawyer Squeeze water filter because it’s cheap, simple, and durable. Well… everything but the Sawyer bags is durable, that’s why I recommend the Evernew water bags instead.

I usually fill the Evernew 2L water bag with dirty water, then sit on top of it, and let my body weight force the water through the filter into a bottle. I’ve also had success with hanging the bag and allowing gravity to force the water through the filter. If I don’t have anything to sit on, I just squeeze the bag until I’ve got as much water as I need.

The Leatherman Squirt pocket knife is pretty nifty for its 66-gram weight. I use the pliers and scissors the most, they’re useful surprisingly frequently. The bottle opener is nice too.

My favourite bottles for bike touring are the Nalgene Silo 1.5-Litre bottles. They are durable, and with a wide opening, very easy to fill and clean too. Make sure to get the Humangear CapCap lids, as they have the perfect shape for sipping on your water. There is no bottle I’d rather drink from!

My Bike Luggage

Luggage Highlights:

I’ve recently made some pretty big changes to my luggage setup.

I’m currently testing the Tailfin Fork Packs instead of my usual Ortlieb front panniers. These bags don’t require a front rack, instead, they connect to some minimalist rails that attach to the 3-boss mounts on my fork. They can also be removed from the rails in just a second or two – just like a pannier.

There are two clear advantages to fork packs. Firstly, the bags give me much more ground clearance over obstacles (~20cm/8″), which is nice when you ride as much off-road as I do. And secondly, the bags do not ever rattle on bumpy roads – they’re impressively quiet.

I’ve also ditched my handlebar bag for a Tailfin top tube bag. This was primarily because I wanted to use this handlebar space to test some aero bars (which I’m also happy with).

As the Tailfin bags can’t be removed quickly from the bike, I nest a Patagonia 1L hip pack inside the top tube bag. The hip pack contains all my travel essentials (passport, wallet, phone, keys) and I can quickly pull it from my top tube bag and take it wherever I go.

Travel Essentials

Travel Essentials Highlights:

The backpack I carry sits inside one of my rear panniers. This bag doubles as a sleeping bag sack, and a laptop case (the extensive foam and loose-fitting sleeping bag protect my laptop well). I use this backpack for carrying groceries in cities and for long day hikes. I like the Salomon TrailBlazer 20 backpack best as it has hip pockets and saves 270 grams (I had to settle for my current backpack in Africa).

The best travel pump I have ever used is the Topeak Turbo Morph G pump. I’ve been using these for 15+ years. It’s a mini floor pump, so you can put your body weight into pumping up your tyres. They’re valved for high-pressure tyres, which means you need to do more pump strokes for every PSI. This only makes inflation easier.

I’m quite happy with the Tex-Lock Orbit lock. It’s a bit heavy, but it’s flexible enough to secure Laura and my bikes around a post. The woven textile shell and flexible design help the inner chain be resistant to hack saws, crow bars, and car jack attacks. Any power tools will, of course, cut through in no time, but the large diameter of the lock should be a deterrent. Anyway, the best way to not get your bike stolen is to be prudent with where you lock it.

Toiletries

Toiletries Highlights:

My favourite item from my toiletries bag is my Linda exfoliating glove. At the end of every day, I always scrub myself thoroughly before jumping into my tent. I pour just a few drops of water into my glove, and it catches all the dust and grit from my body – making me feel 99% clean. The next day I find some running water to rinse the grit out of the glove.

I love the Philips Multigroom hair trimmer I use. I do all my haircuts in a mirror and prefer to keep my beard short. A life hack you probably haven’t heard of is that you can trim your underarm hair, and you and your clothes will smell so much less… seriously!

Another cool item is the Vaincre universal plug. This silicone plug fits over any sink hole and is perfect for handwashing my clothes.

Tools & Spares

Tools & Spares Highlights:

I carry repair kits for everything including my bike, panniers, stove, mat, and tent – as I never know how far I will be from replacement parts. It’s hard to get excited about spare parts but there are a few things I do appreciate.

The Stans tubeless sealant bottles are the perfect size/shape for pouring liquid latex into your tyres. I wrap some plastic over the top of the bottle, and screw the lid over the top – I’ve never experienced spillage. I usually re-fill them with whatever sealant I can find, but my preference is Orange Seal.

It’s also nice to have replacement tubeless valve cores. They don’t weigh much, and improve airflow compared to a bent or slightly clogged valve. I only have to change them every year or so.

Speaking of valve cores, I use nifty tubeless valve caps that have built-in core removers. These are the perfect way to pull out your valve cores and top up your tubeless sealant (if you use it).

Otherwise, I carry replacement nuts and bolts for virtually everywhere on my bike. You never know when a bolt will round out, snap, or rattle loose and fall off. The most important size is bottle cage bolts, their matching nuts and large washers. This is for when the Ortlieb pannier rails inevitably separate from the bag!

Heaviest to Lightest Gear Categories

1. Camping Gear – 5550g (12.2lb)
2. Electronics – 4143g (9.1lb)
3. Bike Luggage – 3747g (8.3lb)
4. Travel Essentials – 2230g (4.9lb)
5. Clothing – 2085g (4.6lb)
6. Shoes & Accessories – 1444g (3.2lb)
7. Cooking – 1360g (3.0lb)
8. Tools & Spares – 1280g (2.8lb)
9. Toiletries – 1071g (2.4lb)
10. Cooking Accessories – 831g (1.8lb)

TOTAL WEIGHT: 23.741 KG / 52.3 LBS

Summary

I hope you can use my gear list to get an idea of (a) what to bring on a long distance bike tour, and (b) what equipment is proven to be the most durable over multiple years of use.

This is a reminder that you should only need to bring this much equipment if you’re on a really big trip!

For shorter trips, you can use lighter-weight equipment as it will see much less use. You can also reduce the tools and spare parts you carry, as well as the electronics. I’ve done lots of short bike tours with less than 10kg (22lb) of total equipment.

The post Bike Touring Gear List: Everything I Carry After 12 Years Around The World appeared first on CYCLINGABOUT.com.

Elite racer Andrew L’Esperance rode to 21st place at UNBOUND using a prototype Fox gravel fork with full aero fairings. Over the 9+ hours out on the course, Andrew averaged a rather sprightly speed of approximately 22mph (35kph).

Aerodynamics matters a great deal at these speeds and distances, so it’s no surprise that we’re seeing aero fairings on gravel bikes.

Let’s take a closer look at this prototype Fox gravel fork.

The Aerodynamic Fox Gravel Fork

The fork is covered in Fox RAD stickers. RAD stands for Racing Application Development, a research/testing arm of Fox that works with pro riders to develop new suspension fork tech.

If you look carefully, Andrew’s fork has been modified to allow the front brake cable to run from inside the stem, and into the fork steerer. It then exits out the bottom of the steerer and is taped down to the brake caliper.

Much more obvious are the aero fairings taped to the back of each fork leg. This gives the fork a whole new look and should allow gravel racers to ride faster with the same effort.

Will An Aero Fox Gravel Fork Make A Difference?

In short, yes.

Cylinder shapes have high drag force for their size. This is because cylinders are quite blunt in shape, and the airflow separates from behind the cylinder’s surface creating both a low-pressure area as well as a turbulent wake. All of these factors contribute to the high overall drag.

Just look at the difference in size between the streamlined aerofoil shape and the wire in the above diagram. The diameter of the wire is one-tenth of the aerofoil, however, both of these shapes have the same aerodynamic drag.

It should come as no surprise that forming fork legs into streamlined shapes would promote more efficient airflow. When you do the calculations, the drag reduction to the Fox gravel fork could theoretically be up to 90% – although this fork shape would be completely impractical.

The Fox 32 Taper-Cast Fork

While we’re here, let’s chat about the Fox 32 Taper-Cast fork.

At 1226 grams, the Fox 32 TC is one of the lightest gravel suspension forks available. Fox keeps the 32 TC weight low by employing a reverse arch crown design. This arch sits behind the tallest part of the wheel and essentially allows Fox to reduce mass without sacrificing any fork stiffness.

In addition, the bottom of the fork legs reveals a truss-like design to reduce weight further.

When it comes to damping adjustment, the Fox 32 TC offers more than most. There is a rebound adjuster at the bottom of the fork, and a lever ring at the top of the fork with three low-speed compression damping positions (open, medium, and firm). The compression damping can then be tweaked further using a second dial inside the lever ring.

The fork can be set up with 40 or 50mm of suspension travel, will clear a 700C x 50mm tyre, has 160mm and 180mm brake rotor compatibility, and is available with a 45mm and 50mm offset/rake option.

The Fox 32 Taper-Cast Gravel Fork costs between US $769 and $949, depending on the model. See more at RideFox.com.

• Bike Gear
• Gear

Spotted: Prototype Fox Gravel Fork With Aero Fairings

byAlee Denham

June 7, 2024

• Comfort Lab

BMC URS LT ONE Review: This Might Be The World’s Best Gravel Bike!

byKrzysztof Wierzbicki

May 25, 2024

• Comfort Lab

HiRide Sterra Suspension Fork Review: Is 20mm Travel Enough For Gravel?

byKrzysztof Wierzbicki

April 18, 2024

• Bike Gear
• Gear

The Cane Creek Invert is a 990g Gravel Suspension Fork With No Damper

byAlee Denham

April 17, 2024

• Bikes
• Gravel Bikes

Here’s Why Gravel Bikes Will Get Much Better In 2025

byAlee Denham

April 5, 2024

The post Spotted: Prototype Fox Gravel Fork With Aero Fairings appeared first on CYCLINGABOUT.com.

So, where to from here?

Manufacturers are now offering stabilized bikepacking bags (and harnesses) that promise a better user experience. There are actually quite a few reasons why stabilized bags make sense, so let’s take a closer look at the advantages, and the slew of products available.

Note: This article was originally published in 2018 but has now been updated in May 2024.

The Advantages of Stabilized Bikepacking Bags

Cable Clearance
Regular bikepacking handlebar packs naturally rest against the shift and brake cables of your bike. Unless you’re running long cables, you might be hampering the performance of your brakes and gears. A stabilized handlebar pack will allow you to lift the load off your cables to prevent any performance hindrances.

Reducing Paint Rub
Handlebar packs often have a strap that fits the headtube of your frame to keep it in place. Over time, this strap will have a go at your paint, along with any other parts of the handlebar pack that are touching your frame. The obvious answer is to fit some clear tape to your headtube so that your paint doesn’t get scuffed, but that’s not necessary with a stabilized bag setup.

Eliminating Front Bag Squeak
Along with regular handlebar packs rubbing on your frame, they can also make an infuriating squeak as you slowly turn your handlebars. You can have a squeak-free bike when you use a stabilized front bag.

Eliminating Bag Sway
Ahh, the dreaded tail wag of a bikepacking seat pack. The more modern seat packs are pretty good at eliminating this, but with a sloppy pack job, even the best will wiggle around. Stabilized seat packs use rack supports to ensure that your rear load is stable at all times.

Clearance
Sometimes the gap between your seat and tyre, or handlebar and tyre is limited. This often means fitting smaller diameter bags with reduced capacities. Many of the stabilized bags increase this clearance by allowing you to lift a handlebar pack higher, or by cinching down a drybag further back behind the saddle.

The Disadvantages of Stabilized Bikepacking Bags

Less Durable
A stabilized system’s biggest downside is that it’s way more susceptible to damage. If you come off your bike or accidentally drop it, you can damage the somewhat fragile rack supports (your bags will be fine). Some products listed here are more durable than others – before buying, it’s prudent to research whether these products are lasting the test of time. I normally search the name of a product plus ‘broken’ or ‘cracked’ into a search engine (eg. ‘Arkel Seatpacker broken’).

Extra Weight
While most handlebar and seat packs are in the 300-450 gram range, the stabilized gear is often 600 grams or more. This may be a concern for those who are racing but won’t make much of a difference to your overall pack weight otherwise.

Note: We may earn a commission should you purchase a bag through our links. This directly supports CYCLINGABOUT.com and allows us to continue providing high-quality cycling information to you.

Front Stabilized Bikepacking Bags and Harnesses

Aeroe Spider Cradle

• Weight: 479 grams or 17 oz
• Load capacity: 5kg or 11lbs
• Price: US $79 on Amazon

The Aeroe Spider harness allows you to attach any drybag you like to your handlebar, although Aeroe sells a dry bag with webbing in the right spots to suit the harness straps. The maximum luggage weight on this harness is 5kg/11lbs.

Arkel Rollpacker 15 and 25

• Weight: 680 grams or 24.0 oz
• Load capacity: 7kg or 15.4lbs
• Price: US $239 at Campfire – 15-Litre Dry Bag
• Price: US $249 at Campfire – 25-Litre Dry Bag

This dual-access bag has an accessory bag attached to the front, and it’s all supported with two arms that swoop under the bag to hold it in place. It’s available in either a 15-litre or a rather monstrous 25-litre configuration suited to flat bars. The maximum capacity is 7kg/15lbs.

Blackburn Outpost Elite Handlebar Pack

• Weight: 795 grams or 28.0 oz
• Load capacity: 3.6kg or 8lb
• Price: US $199 on Amazon

The original Blackburn Outpost was one of the first stabilized bags. The latest version, the Outpost Elite, uses a plastic handlebar mount to attach the harness, and once your drybag is locked in place, two straps keep your bag riding high.

The drybag that is provided with the Outpost Elite is 14 litres and the system has a maximum load capacity of 3.6kg/8lbs.

Goodday Curiosity Spacer Cradle Rack

• Weight: 230 grams or 8.1 oz
• Load capacity: 5kg or 11lbs
• Price: US $175 at Goodday

The Spacer Cradle is essentially a second stem. Simply remove the top cap, stem, and spacers, slide the cradle on where the spacers were, and then reassemble and tighten.

The cradle body is 230mm wide and is compatible with any stuff sack or roll-top bag with a circumference of 760mm (30 inches) or less. The cradle has strap guides for quick on-and-off bag attachment, and two straps are included too.

Gramm Handlebar Roll

• Weight: 580 grams or 20.5 oz
• Load capacity: 5kg or 11lbs
• Price: €229 at Gramm-Tourpacking

This Handlebar Roll features a lightweight quick-release system that mounts to your handlebars. Locked into place, the bag moves with the bike over any terrain, and it’s a snap to remove when you need to get at your gear.

The roll-top expands for up to 12 liters of highly water-resistant storage, which fits an ultralight tent, air mattress, and sleeping bag. The accessory bar provides real estate for mounting lights and GPS units right where you need them.

Jack The Bike Rack

• Weight: 700 grams or 24.7 oz
• Load capacity: 5kg or 11lbs
• Price: £80 at Wholegrain Cycles

Jack is a universal-fit front bicycle rack that securely straps to almost any bike, offering a straightforward solution to carrying your things with you while you ride.

This rack fits your bike with a tool-free strap system, requiring no special bicycle frame or fork, no specialist equipment, and no bike maintenance skills.

Orbiter Rack

• Weight: 288 grams or 10.1 oz
• Load capacity: 5kg or 11lbs
• Price: US $215 at Pedal Stoke

The Orbiter is a steerer-based gear mounting system that allows your handlebars to freely ‘Orbit’ any racks, packs, or snacks held by The Orbiter. This means that your bike can now have front accessories that don’t move with your handlebars, making your steering feel lighter on technical or steep terrain.

Ortlieb Handlebar Pack QR

• Weight: 530 grams or 18.7 oz
• Load capacity: 5kg or 11lbs
• Price: US $165 at Campfire

The waterproof Ortlieb Handlebar Pack QR can be attached and removed from your bike in no time thanks to the bar-lock cord attachment. This attachment also allows this bikepacking bag to remain stable and secure, even on rougher terrain. It has an 11-liter volume, weighs only 530 grams, and is loaded from above.

PDW Gear Belly

• Weight: 1026 grams or 36 oz (with bag)
• Load capacity: 7kg or 15lbs
• Price: US $120 at Angry Catflish

The Gear Belly uses a handlebar mount to secure the harness in place. It offers cinching straps on both the inside and outside of the harness which ensures your drybag is going nowhere.

The Gear Belly without a dry bag is 850g, and it’s 1026g with a Revelate Saltyroll with a 15-litre capacity. The cradle has a 7kg/15lbs capacity.

RatKing Cradle

• Weight: 265 grams or 9.4 oz
• Load capacity: 5kg or 11lbs
• Price: US $175 at RatKing

The Ratking Cradle is an adjustable bag support + cargo platform for bicycle fork steerers or seat posts. It replaces 20 mm of headset spacers and the adjustable tilt allows you to fine-tune your fit for your desired bags and your specific handlebar setup.

The height adjustment will get the cradle into a prime location even with short stems, minimal spacer stacks, short head tubes, and suspension forks.

Restrap Bumper Bar

• Weight: 178 grams or 6.3 oz
• Load capacity: 5kg or 11lbs
• Price: US $59 at Angry Catfish

The Bumper Bar is a unique accessory that serves multiple functions; as a hard point for mounting lights, while also acting as a spacer for our range of bar bags, pushing them upwards and away from the front wheel.

This mount is ideal for smaller bikes with a low stack height or where handlebar-to-tyre clearance is limited.

Rockgeist BarJam Harness 2.0

• Weight: 283 grams or 10 oz
• Load capacity: 5kg or 11lbs
• Price: US $185 at Rockgeist

The Rockgeist BarJam is a lightweight, exceptionally stable bikepacking harness+bracket that protects your brake, shifter, and dropper cables. The 2.0 version of this harness increased the strength of the brackets to an ultimate load of 728 lbs force!

Rogue Panda Blue Ridge

• Weight: 240 grams or 8.5 oz
• Load capacity: 5kg or 11lbs
• Price: US $185 at Rouge Panda

With CNC-machined aluminum clamps, the Blue Ridge holds your dry bag securely in place with no need for a head tube attachment. Twin carbon fiber bars hold your load away from your head tube, and nylon shims protect your handlebar (available in 35mm, 31.8mm, and 22.2mm sizes). The result is a handlebar harness that won’t move.

Salsa EXP Series Anything Cradle

• Weight: 640 grams or 23.0 oz
• Load capacity: 3.6kg or 8lbs
• Price: US $239 at Campfire – Top-Load Kit
• Price: US $239 at Campfire – Side-Load Kit
• Price: US $119 at Campfire – Cradle Only

The Salsa EXP Anything Cradle is the bag of choice of my partner Laura, who has been using it on our recent journeys throughout Africa, Asia, Australia, and North America. It has been such a solid bit of kit and put up with over 25,000km of abuse.

The cradle is incredibly stable on the bike, and the two Voile-style straps have a nice amount of stretch on them to make mounting your dry bag very easy.

There are two models to choose between. We prefer the ‘Top-Load’, which comes with a roll-top dry bag. This essentially allows you to find what you need in the dry bag without emptying the contents – I’ve got no idea why they aren’t more common. The Top-Load is also suitable for drop bars as the bag width is fixed. The ‘Side-Load’ is a conventional dual-access dry bag, which has the advantage of an extra litre of volume.

This cradle not only fits a 12.7-litre dry bag, but a large front accessory bag too. The handlebar mount will support up to 3.6kg/8lbs and will fit onto 31.8mm or 35.0mm diameter handlebars.

You can pick up the Top-Load kit from our good friends at Campfire Cycling.

Swood Twisted T-Bar

• Weight: 104 grams or 3.7 oz
• Load capacity: 5kg or 11lbs
• Price: US $75 at Haute Bike

Taking the place of a 1/2″ spacer directly underneath the stem on any 1 1/8″ steerer, the T-Bar 2.0 supports your handlebar bag, giving extra strength and rigidity whilst stopping rubbing against the headtube and relieving pressure on the brake/shift cables. The BXB Goldback bag is a perfect fit for this product.

VAP Butterfly 3

• Weight: 660 grams or 23.0 oz
• Load capacity: 5kg or 11lbs
• Price: €280 at VAP Cycling

Vap Cycling recently unveiled a neat stabilized harness kit to hold a dry bag. The mounting kit includes an aluminium structure (two different lengths) that bolts to your handlebar and offers four points for the sling to grab on. The front section doubles as a light and GPS mount or a location for some bar-ends should you be using the optional aero bar elbow pads.

The harness is made from a non-slip fabric called ‘Rubbotex’ which is used in the nautical industry, and it’s reinforced with two glass fibre sticks to keep the harness rigid even when not filled. The mounting kit and harness weigh in at 490 grams, which is boosted up to 660 grams when using the 11-litre dry bag.

Vincita Strada

• Weight: 1100 grams or 2.4lb
• Load capacity: 5kg or 11lbs
• Price: US $115 at Vincita

Little-known Thai brand Vincita produces a really neat harness called the Strada, which uses a Klickfix handlebar mount to attach and remove your harness from your bike. The supplied dry bag is relatively small at 8.9 litres, but the harness will fit a 15-litre dry bag if you use a flat handlebar.

WZRD Ritual Rack Lite

• Weight: 1.2 kg or 2.7lbs
• Load capacity: 5kg or 11lbs
• Price: CA $500 at WZRD

The Ritual Rack LITE handlebar is custom-made by WZRD Bikes and integrates a dry bag cradle into the handlebar itself. This option is not cheap at all – expect around US $400 for a bar built to your every specification.

Rear Stabilized Bikepacking Bags

Aeroe Spider Rack

• Weight: 979 grams or 28 oz
• Load capacity: 16 kg or 35 lbs
• Price: US $131 at Nashbar – Spider Rack only

The seat stay Spider Rack is the base layer of the Aeroe system. It comes with a Cradle to carry a dry bag or tent, but you can also buy up to two additional Cradles that will fit to the sides of the rack.

If dry bags aren’t your jam, Aeroe also sells 11-litre hard shell pods that will attach to the rack via a quick-release mechanism. The Spider rack supports a rather hefty 16 kg (35lbs).

Arkel Seatpacker 9 and 15

• Weight: 640 grams or 23 oz
• Load capacity: 5 kg or 11 lbs
• Price: US $219 at Campfire – 9-Litre Dry Bag
• Price: US $229 at Campfire – 15-Litre Dry Bag

The Seatpacker is the narrow bikepacking seat pack option by Arkel. It uses a mini-rack that mounts to both the seatpost and saddle rails to ensure the bag is free from tail wag. Given the design, it can be mounted to a dropper seatpost too. The Seatpacker is available in 9 and 15-litre sizes and will handle 5kg/11lbs.

Note: A friend’s Arkel mini-rack snapped on the Baja Divide route. It’s worth researching whether this product has been recently updated, or keep some hose clamps on hand.

Arkel Rollpacker 15 and 25

• Weight: 908 grams or 1.8 lbs
• Load capacity: 7 kg or 15.4 lbs
• Price: US $289 at Campfire – 15-Litre Dry Bag
• Price: US $299 at Campfire – 25-Litre Dry Bag

The Rear Rollpacker is a great bag for cyclists seeking a functional and high-performance storage solution. This bag stands out for its stability, thanks to its two attachment points that prevent any movement when riding.

The same front Rollpacker bags are used on the rear too, but the rear kit comes with a special quick-release saddle rack.

If you have a limited distance between your saddle and tyre, you can mount these 15 or 25-litre bags on top of the rack (pictured). But hang it underneath the rack for a lower center of gravity if you’ve got the space.

Bedrock Coconino

• Weight: 419 grams or 14.8 oz
• Load capacity: 5 kg or 11 lbs
• Price: US $200 at Bedrock

Born on a rough singletrack tour in 2014, the Coconino is a very different and improved take on the traditional bikepacking seat pack. The Coconino doesn’t move around on even the roughest trails thanks to its “RailWing” attachment. The Coconino should also easily survive crashes intact as the bag support is notably tough.

Blackburn Outpost Elite

• Weight: 572 grams or 20 oz
• Load capacity: 5 kg or 11 lbs
• Price: US $147 on Amazon

The Outpost Elite is a two-part system. An alloy wing attaches to your saddle rails and is intended to minimise bag sway. You then have a removable and waterproof dry bag, which has an air-bleed valve to assist with compression while off the bike.

As the rack does not connect to the seatpost, it makes the Outpost Elite suitable for both dropper seatposts and carbon seatposts too. The maximum capacity is 4.8kg/11lbs.

Carradice Colorado

• Weight: 650 grams or 1.4lbs
• Load capacity: 6 kg or 13.2 lbs
• Price: £105 at Carradice

This 12-16 litre seat pack and the seat-rail-mounted rack are made by Carradice, who has been making bike bags for almost a century. Thanks to the small support, Carradice promises no drooping onto the back wheel, and minimal side-to-side sway when riding out of the saddle. The quick-release support even allows for one-handed mounting of the bag!

The Colorado is available in black, neon, or camo and will comfortably carry 3kg/6.6lbs. For heavier loads (6kg/13.2lbs) you can connect a compression strap from the saddle rails to the tab on the underside of the bag to ensure it gets enough support.

Carradice Super C with Bagman QR Support

• Weight: 1.38 kg or 3.0 lbs
• Load capacity: 10 kg or 22 lbs
• Price: US $154 at Campfire – Super C 23-Litre Bag
• Price: US $109 at Campfire – Bagman QR Support

The Super C Saddlebag is the ideal bag for longer rides or touring. Its durable construction and breathable cotton duck canvas ensure that all your contents will remain safe and dry.

These saddlebags mount directly into the saddle loops behind Brooks saddles, but it’s recommended to use Carradice’s stabilizing rack that keeps your bag stable and allows you to install or remove the bag in seconds. The Bagman QR support (pictured above) is good for up to 10kg/22lbs but is not rated for off-road use.

D rings are located at the back of the bag to allow a shoulder strap to be fitted for off-bike carrying, and the Super C is easily re-proofed and repaired.

Ortlieb Seat Pack QR

• Weight: 625 grams or 22 oz
• Load capacity: 5 kg or 11 lbs
• Price: US $195 on Amazon

Constructed with an innovative attachment system and abrasion-resistant fabric, this 13-litre seat pack is super stable, quickly mounted, and just as quickly removed.

The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear.

To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. This bag can even be used with a dropper post.

PDW Bindle Rack

• Weight: 350 grams or 13 oz
• Load capacity: 5.34 kg or 11.8 lbs
• Price: US $88 at Angry Catfish – Rack Only
• Price: US $38 at Campfire – Revelate 14-Litre Dry Bag

The Bindle Rack is a popular option for those with minimal clearance between their seat and tyre.

This rack prevents side-to-side sway while riding and wheel-to-bag contact for riders with short seat posts. You can use the included straps to cinch down a dry bag like the Revelate Terrapin (pictured above).

The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. The maximum capacity is 5kg/12lbs, and the rack cannot be used with carbon seatposts.

Revelate Spinelock Seat Bag

• Weight: 680 grams or 24 oz
• Load capacity: 5kg or 11lbs
• Price: US $179 at Campfire – 10-litre Dry Bag
• Price: US $185 at Campfire – 16-litre Dry Bag

The Revelate Spinelock stability system consists of three components: the saddle clamp, seat bag mounted Spine baseplate, and pin.

To connect the bag, you simply line up your selected mounting position to the seat-mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you’re ready to ride!

The bags are available in 10-litre or 16-litre sizes.

Rockgeist Mr. Fusion Seat Pack

• Weight: 560 grams or 20 oz
• Load capacity: 5kg or 11lbs
• Price: US $230 at Rockgeist

The Mr. Fusion seat packs consist of a dry bag and harness system that’s supported by a mini-rack. You can get the dry bags in large (8-12 litres) or XL sizes (10-15 litres). The mini-rack is not suitable for carbon seatposts.

Roswheel Off-Road Seat Pack

• Weight: 600 grams or 21 oz
• Load capacity: 5kg or 11lbs
• Price: US $95 on Amazon

Roswheel makes medium and large-sized seat packs (8-litre or 15-litre) that are suitable for off-road riding. A 27.2mm or 31.6mm diameter support rack keeps everything stable, but like similar rack designs – these are not suitable for carbon seatposts.

Tailfin AeroPack Alloy

• Weight: 925 grams or 32.6 oz
• Load capacity: 9kg or 19.8lbs
• Price: £275 at Tailfin

The AeroPack Alloy is a little different because the rack connects at both the seatpost and rear axle. The included 20-litre dry bag ends up sitting on top of the rack where you’d normally find a standard seat pack.

Two long cinching straps also allow you to expand your volume even further if you need to by adding an extra dry bag on top.

Topeak Backloader X

• Weight: 723 grams or 25.0 oz
• Load capacity: 5kg or 11lbs
• Price: US $115 at Angry Catfish – 10-litre Dry Bag
• Price: US $130 at Angry Catfish – 15-Litre Dry Bag

The Backloader X harness is designed to be used in conjunction with the optional Topeak Backloader Wishbone. With the harness connected to the stabilizer, bag sway is significantly reduced.

The Topeak bikepacking harness is available with either 10 or 15-litre dry bags. A neat feature is the bottle cage mounts on either side of the Wishbone that add extra water capacity.

VAP Kangaroo Seat Pack

• Weight: ±600 grams or 21.0 oz
• Load capacity: 5kg or 11lbs
• Price: €185 at VAP Cycling

VAP Cycling makes a rear bikepacking harness with lower rack support. The system comes with a 15-litre dry bag and you can get the Kangaroo rack for 27.2mm, 30.9mm, or 31.6mm diameter seatposts. This bag/rack combo is not suitable for carbon seatposts.

Other Bikepacking Bag Stabilizers and Protectors

Stabilizers: Woho, Topeak, Williamly, ECYC, Rhinowalk, Minoura

These products are designed to stabilize any seat pack you like – but please note that they get mixed reviews regarding whether they do an effective job.

Woho came up with this rather simple stabilizing bracket that has now been copied by a handful of manufacturers. These brackets mount directly to your saddle rails and cradle either side of your seat pack to stop the bag sway. As a bonus, you will find bottle cage mounts on either side of the bracket.

Dry Bag Protector: Rockgeist Armadillo

And lastly, you can always just fit a rear rack to your bike and use rubber straps to cinch down a dry bag! If you do decide to go down this route, just make sure to protect your dry bag from wearing against your rear rack on bumpy roads.

Rockgeist makes a bag protector called the Armadillo, which is cut in a great shape and has loops for elastic straps (see above).

The post The Best Stabilized Bikepacking Bags & Harnesses (With Rack Supports) appeared first on CYCLINGABOUT.com.

• Best Tubeless Sealant For MTB Tires: Orange Seal Regular
• Best Tubeless Sealant For Road & Gravel Tires: Peaty’s Holeshot Biofibre
• Best Tubeless Sealant For The Price: Squirt SEAL
• Best Tubeless Sealant For Global Availability: Stans Original
• Best Tubeless Sealant For Race Situations: Stans Race Day

The Long Version

I’ve been on a quest to find the best tubeless sealant products for two decades now, and today, I’m excited to be sharing the results of my findings!

Not only have these tire sealants all been independently tested to perform better than the rest, but I’ve performance-tested them myself on various bicycle journeys across countries and continents.

You’ll find top-rated sealants here for low-pressure mountain bike tires, mid-pressure gravel bike tires, and high-pressure road bike tires.

If you want to analyze the puncture test data for yourself, you’ll find handy tables of the 48 different tire sealants at the bottom of this resource.

But before we get to the best tubeless sealant products, let’s learn a thing or two about sealant first.

Tubeless Sealant FAQ

What is Tubeless Sealant?

Tubeless sealant is a liquid that sloshes around in the space between your tire and rim. This liquid replaces a typical bicycle inner tube, creating an airtight seal inside your tire.

Tubeless tire sealant also repairs small punctures while you ride, often without you even knowing.

How Does Tubeless Sealant Work?

When a puncture occurs, the air pressure inside your tire pushes the sealant toward the puncture site. Through both a chemical and physical process, the sealant will then clot the hole after being exposed to the outside air.

Small, suspended particles (particulate) inside the sealant are designed to create additional surface area for the liquid base to clot around. This clotting process can repair holes up to 6 or 7mm (1/4″) in your tire but it also plays an important role in maintaining the airtight seals between your rim, tire, and air valve.

How Do We Benchmark Tubeless Sealant Performance?

The best way to benchmark tubeless tire sealants is to punch holes of different sizes in a tire and check to see if the sealant can repair the puncture.

If the repair is successful, we can measure the air loss. The sealant with the least air loss for a given hole size is regarded as the best.

Tests in a laboratory are the most accurate at taking measurements, however, they do not take into account the forces on the tire while riding.

Tires will stretch and pull apart while riding (especially under cornering loads) so I believe that outdoor tests provide a more realistic impression of sealant performance, even if the measurements are less accurate.

The gold standard in outdoor testing is conducted more than one month after the sealant has been installed. This tests the performance of the sealant after it has degraded a bit, which is a more realistic riding circumstance than a fresh installation.

Why Does Tubeless Tire Sealant Usually Use Latex?

Almost all tubeless sealants use latex. Latex is an extremely stretchy material that, even in very small quantities, can hold back both liquid and air.

There are other alternatives to latex, but they almost always test to be less effective.

How Long Does Tubeless Sealant Last?

Most sealants are effective inside your tires for between two and five months.

How long the sealant lasts depends on many factors, including how often you ride, how much has escaped through punctures, the temperatures and humidity in your area, and the brand and model of sealant you are using.

With some sealants, you’ll find dried latex inside the tire after a few months as the additives will have evaporated from the formula. With other sealants, you will find the latex will have all been absorbed by your tire, leaving the additives.

Some tubeless tire sealants will stay liquid for longer as they are formulated with higher percentages of additives. But performance takes a hit – they are thinner and take longer to coagulate around punctures.

What Temperature Range Does Tubeless Sealant Work In?

Most tire sealants will perform between -10C/14F and +50C/122F, however, some sealants have been specially formulated to be effective right down to -30C/-20F.

Can You Use CO₂ Cartridges with Tubeless Sealant?

CO₂ cartridges can be used in emergencies with tubeless tire sealant.

However, if the cold blast of gas goes directly into the sealant it can cause lumps inside latex-based sealants. Make sure to only inflate your tire with the valve at the top position (12 o’clock).

Exposure to CO₂ for multiple days can additionally cause the sealant to degrade, decreasing its longevity. If you inflate with CO₂, make sure to replace it with regular air as soon as possible.

Can You Refresh Tubeless Tire Sealant Through The Air Valve?

Thinner tubeless tire sealants can be refreshed through the air valve.

Sealants with larger, suspended particles are not suitable for valve installation. Instead, you will need to break the tire bead from the rim or the air valve will clog.

Can You Use Tubeless Sealant With High-Pressure Tires?

Most tubeless sealants will repair small holes in road bike tires. However, when it comes to larger punctures, the data suggests that performance varies significantly between brands.

When we analyse the properties of the sealants that perform best on road bike tires, it’s clear there should be large suspended particles in the sealant to clot the larger holes. These particles can seal a big hole in a high-pressure tire much quicker and with little air loss.

Why Does Tubeless Sealant Seep Through Tire Sidewalls?

This is the latex part of the sealant getting soaked up by tires with porous sidewalls. It will eventually stop when the tire is airtight.

The good news is that tire companies are getting better at reducing seeping. But expect tires with very thin, supple sidewalls to be most prone to this phenomenon.

If you notice this occurring in your tires, make sure to add an extra 30 ml of sealant (1 fl oz) after a few days. This replenishes any latex lost and will ensure your sealant can perform properly.

Which Products Were Puncture Tested To Find The Best Tubeless Sealant?

I assessed the data from the following 48 tubeless sealant products:

Comparing The Five Best Tubeless Sealants

1. Orange Seal Regular Tubeless Sealant

The Best Tubeless Sealant For MTB Tires

The best tubeless sealant for mountain bikes is Orange Seal Regular. This thin sealant performs extremely well in all independent tests, resulting in very little air loss on punctures of all sizes.

Orange Seal Regular is also one of the very few sealants that can genuinely seal up a huge hole without even getting off your bike.

This was my sealant of choice while I was mountain biking during the pandemic. The city where I was living (Oaxaca, Mexico) is a notably thorny region, and I am happy to report that Orange Seal always got on top of sealing holes.

Orange Seal films your tire in the first month, so expect around 50% of the liquid to be lost in this process. The remaining liquid typically lasts between 1-3 months longer depending on the environmental conditions it’s exposed to.

Lab Test Data

How much air pressure is lost with Orange Seal Regular?
3mm Puncture: 2.1 psi @ 22 psi – 3rd of 11 (AMB)
3mm Puncture: 0.3 psi @ 25 psi – 2nd of 8 (Bicycling)
3mm Puncture: 0.8 psi @ 20 psi – 4th of 5 (Singletracks)
3mm Puncture: 3.0 psi @ 27 psi – 3rd of 20 (Velo Vert)
4mm Puncture: 3.9 psi @ 25 psi – 2nd of 8 (Bicycling)
6mm Puncture: 3.2 psi @ 22 psi – 1st of 11 (AMB)

When we look at the MTB tire puncture tests, Orange Seal Regular has seriously impressive puncture repair characteristics. In every puncture test I could find, this sealant closed the puncture sites with very little pressure loss. Even with a 6mm cut, there was just 3.2 psi lost – few sealants can master that!

It’s worth noting the Endurance version of Orange Seal will last significantly longer in your tires, and there’s even a Subzero version that’s formulated for extreme cold temperatures.

The downside to these sealant formulations is that you trade off some sealing performance. According to the Bicycling data, Orange Seal Endurance is ok at dealing with small holes, but not so good when it comes to bigger holes (a plug will be necessary).

Keep in mind you can mix in Orange Seal Regular and Endurance together if you want to trade a bit of performance for some longevity.

Best Deals For Orange Seal Regular

• $35 on Amazon (946 ml bottle)
• $21 on Amazon (473 ml bottle)
• $17 on Amazon (237 ml bottle with valve injector)
• $19 on Amazon (Professional injector syringe for installing or removing sealant through valve)

2. Peaty’s Holeshot Biofibre Tubeless Tyre Sealant

The Best Tubeless Sealant For Gravel & Road Tires

Peaty’s Holeshot Biofibre is thicker than other sealants on this list, especially those with a latex base. It contains lots of suspended particles, which results in a product that’s best suited to road and gravel bike tires with high air pressures.

The particulate is highly visible inside Peaty’s sealant. These biodegradable particles are made from starches as well as a special form of cellulose that has been sourced from responsibly managed eucalyptus plantations.

Peaty’s claims Holeshot Biofibre to be compatible with CO2 (in contrast to other sealants), and despite being quite thick, this sealant can still be installed through your valve. The reusable trail bag (120 ml) is a great way to get the sealant into your tires – simply remove your valve core and squeeze the sealant in.

Lab Test Data

How much air pressure is lost with Peaty’s Holeshot?
1.5mm Puncture: 1.0 psi @ 87 psi – 1st of 11 (Fiets)
3mm Puncture: 18.9 psi @ 29 psi – 5th of 11 (Fiets)
4mm Puncture: 21.8 psi @ 29 psi – 2nd of 11 (Fiets)
5mm Puncture: 0.1 psi @ 40 psi – 1st of 18 (Off-Road.cc)

According to the data, Peaty’s Holeshot outperforms all other sealants at the gravel and road bike tire pressures.

In the Fiets test, Peaty’s sealant lost just 1.0 psi from a starting pressure of 87 psi when stabbed with a 1.5mm thick nail – the tire then later held 101 psi with its repair. In the Off-Road.cc test, it repaired a 5mm cut at 40 psi with just 0.1 psi lost!

Peaty’s Holeshot Biofibre is less impressive at mountain bike tire pressures, so I’d recommend some of the other sealant options for low air pressures.

Best Deals For Peaty’s Holeshot Sealant

• $36 on Amazon (1000ml bottle)
• $29 on Amazon (500ml bottle)
• $7 on Amazon (Re-fillable 120ml pouch that attaches to valve)
• $19 on Amazon (Professional injector syringe for installing or removing sealant through valve)

3. Squirt SEAL Tyre Sealant

The Best Tubeless Sealant For The Price

As you know by now, large particles in tubeless sealant create additional surface area for the liquid to coagulate around. The problem is the particles can sometimes settle at the bottom of sealant bottles, making them hard to pour into your tire at the appropriate ratio.

To solve this problem, Squirt SEAL comes in two parts: the liquid sealant, and the BeadBlock particles. You will need to mix them at a rate of 3-5ml particles (one cap) per 100ml-150ml of sealant.

A cool thing is that you can customise the ratio according to your riding conditions. For example, if you were going somewhere with a high chance of punctures, you could add a bit more BeadBlock.

We used Squirt SEAL with BeadBlock on our 3,000km bike tour through Outback Australia, and never needed to plug a hole.

The only thing to note is that the particles require a good quantity of liquid sealant to transport them to the puncture site, so make sure to check your levels periodically. I’ve also found the sealant to disappear quicker than most, so I tend to use 20-30 ml more Squirt in my tires than comparable sealants.

You can top up the liquid sealant through your valve, but you’ll need to unseat your tire to install the BeadBlock particles. That said, Squirt makes a 150ml-sized container with a slightly different sealant formulation that can go through your valve. This product is primarily designed for top-ups out on the trail.

Lab Test Data

How much air pressure is lost with Squirt SEAL?
1.5mm Puncture – 3.6 psi @ 87 psi – 3rd of 11 (Fiets)
3mm Puncture – 1.2 psi @ 22 psi – 1st of 11 (AMB)
4mm Puncture – 2.8 psi @ 29 psi – 1st of 11 (Fiets)
5mm Puncture – 9.6 psi @ 29 psi – 1st of 11 (Fiets)
6mm Puncture – 10.9 psi @ 22 psi – 8th of 11 (AMB)
6mm Puncture – 14.2 psi @ 29 psi – 1st of 14 (Fiets)

In terms of performance, Squirt SEAL is one of the best according to the lab test data.

Squirt SEAL lost the least pressure in the 3mm MTB puncture test by AMB (out of 11 sealants), and in the Fiets test, it lost the least pressure in the majority of the MTB puncture tests conducted (out of 14 sealants).

Squirt SEAL gets a perfect score for road bike tires. This sealant lost 3.6 psi from a starting pressure of 87 psi in the Fiets test when stabbed with a 1.5mm thick nail. The tire then later held 101 psi with its repair.

Best Deals For Squirt SEAL

• $30 on Amazon (1000 ml bottle)
• $15 on Amazon (150 ml bottle)
• $25 on Amazon (120 ml with a pouch that attaches to valve)
• $19 on Amazon (Professional injector syringe for installing or removing sealant through valve)

4. Stans Original Tubeless Sealant

The Best Tubeless Sealant For Global Availability

Stans produce two versions of their tubeless tire sealant: Original and Race Day.

Stans Original has the best global availability of any sealant, and for a good reason – it works very well at air pressures in the 15 to 40 psi range (MTB and gravel tires).

I started using Stans almost 20 years ago on my mountain bikes. For the first decade, this sealant was much better than everything else, but nowadays, the competition has caught up.

Laura and I are currently using Stans Original on our off-road journey through Namibia, South Africa, Lesotho, Eswatini, and Mozambique. It has been 9,000km so far, and we’ve been puncture-free despite the excess acacia thorns and goat heads littered around the place.

A huge advantage to Stans Original is that it’s one of the least viscous sealants around (ie. it’s runny). This makes it easy to install through your valve, and easy to syringe out of your tires too (great for swapping tires).

Stans Original sealant also lasts longer than most. When we recently opened our tires up after four months of cycling in hot conditions, there was still sealant in its liquid form, and no dried latex to be seen.

I should note that Stans also manufacture Schwalbe Doc Blue sealant, and I suspect it’s a near-identical formula based on the Fiets.nl lab data below.

Lab Test Data

How much air pressure is lost with Stans Original?
3mm Puncture: 2.3 psi @ 22 psi – 4th of 11 (AMB)
3mm Puncture: 4.2 psi @ 25 psi – 5th of 8 (Bicycling)
3mm Puncture: 0.3 psi @ 20 psi – 1st of 5 (Singletracks)
4mm Puncture: 11.2 psi @ 25 psi – 5th of 8 (Bicycling)
5mm Puncture: 2.0 psi @ 40 psi – 8th of 18 (Off-Road.cc)
6mm Puncture: 8.2 psi @ 22 psi – 5th of 11 (AMB)

The Stans Original puncture repair performance is great for any smaller cuts to your MTB or gravel tires. With minimal air loss, you can simply continue your ride without needing to get your pump out.

For bigger cuts in the 4-6mm size range, it doesn’t perform as well, and you likely will need to use a plug. The Stans Dart plug is a cool product that creates a chemical reaction with the sealant for a super strong repair.

Stans Original falls flat when it comes to sealing tires at high road bike pressures. In the Fiets.nl test it only just sealed the road bike tire, but lost 77 out of 87 psi in the process. When the tire was inflated back up, this repair couldn’t hold high pressure.

Best Deals For Stans Original

• $33 on Amazon (946ml bottle)
• $20 on Amazon (473ml bottle)
• $8 on Amazon (59ml bottle that can pour into tubeless valve)
• $19 on Amazon (Professional injector syringe for installing or removing sealant)

5. Stans Race Day Sealant

Best Tubeless Sealant For Race Situations

Stans Race Day uses twice as much particulate as Stans Original, which allows it to seal big holes with the least air loss. It’s one of the very few that can top Orange Seal Regular in the MTB puncture tests, and it’s proven to be very effective with high-pressure road tires too.

The downside to Stans Race Day is that the high amount of particulate can clog your valve. As a result, it must be installed directly into the tire over the bead.

This sealant also dries out quicker than most. Some people report zero liquid in just 4-6 weeks in hot conditions, which puts this sealant in the high-maintenance sealant category (yep, it’s race day use).

That said, Race Day and Original can be mixed, so perhaps a 50/50 or 70/30 combination of the two would provide a better balance between high performance and longevity.

Lab Test Data

How much air pressure is lost with Stans Race Day?
1mm Puncture: 0.2 psi @ 29 psi – 1st of 11 (Fiets)
2mm Puncture: 0.4 psi @ 29 psi – 1st of 11 (Fiets)
3mm Puncture: 2.3 psi @ 25 psi – 4th of 8 (Bicycling)
4mm Puncture: 3.0 psi @ 25 psi – 1st of 8 (Bicycling)

5mm Puncture: 1.2 psi @ 40 psi – 7th of 18 (Off-Road.cc)
1.5mm Puncture: 5.5 psi @ 87 psi – 6th of 11 (Fiets)

If you’re happy to trade some longevity for additional performance, Stans Race Day is among the best at MTB tire pressures.

It came in first place in multiple MTB tire puncture tests, losing just 0.2 to 0.4 psi in the small cut tests. When it came to Bicycling’s 4mm puncture test, it lost only 3.0 psi, which is a clear step up in performance compared to Stans Original (11.2 psi in the same test).

Additionally, Stans Race Day lost 1.2 psi in the gravel tire test and was able to seal a road bike tire quite effectively. It undoubtedly deserves its slot in this shortlist.

Best Deals For Stans Race Day Sealant

• $41 on Amazon (946 ml bottle)

Summary

When we inspect the puncture test data, the best tubeless sealant rises to the top! I’m certain you’ll be happy with any of the sealants I’ve recommended.

Orange Seal Regular stands out as the best for MTB. It closes small holes with minimal air loss and impressively seals the 5 and 6 mm holes with just a few psi missing. The only slight area of weakness is that it doesn’t last quite as long as other sealants, but we’ve found more than half is still left a few months in.

Peaty’s Holeshot Biofibre is a top performer at the gravel and road bike tire pressures. It lost the least amount of air pressure in all mid-to-high pressure puncture tests I could find. That said, Peaty’s seems to lose more air than most sealants in mountain bike tires (perhaps because it’s so thick) so I’d recommend picking another sealant for low-pressure tires. Another benefit of Peaty’s is that it’s one of the longest-lasting sealants you can buy.

Squirt SEAL has the lowest cost per 100 ml, it seals big holes, and all data suggest it can repair small-to-medium punctures quickly with the least air loss. I like that the BeadBlock particles are separate as it means you can add them when you install your tire, and later just top up liquid through the air valve. The only downside to SEAL is that it seems to lose more air than other sealants in the big cut tests (5 to 6mm), and the liquid latex seems to evaporate quicker than some.

Stans Original and Stans Race Day are right up there too. Original strikes a great balance between longevity, performance, and the ability to install through a valve. If you’re willing to trade some longevity for performance, Race Day seals some of the biggest holes with the least air loss. There is a reason why Stans sealants have been the most popular for two decades now.

Lab Test Data

MTB Tire Puncture Test @ 22 psi (AMBMag.com.au)

The AMB Mag puncture test is perhaps my favourite here, as it provides the most useful information to the everyday cyclist who isn’t regularly changing their sealant.

AMB Mag tested 11 different sealants on 11 different wheels – all using the same tire. A big difference between this test and others is that they rode with the wheels for 36 days before testing the puncture repair performance, which factors in sealant longevity (most tests are conducted with fresh sealant). There were no punctures in the test period.

For the puncture test itself, each tire was pumped to 22 psi (1.5 bar) and then stabbed with a sharp 3mm tool near the transition edge blocks. The wheels were then ridden on a mix of surfaces with a timer on. AMB Mag measured how long it took before the puncture was sealed, and the final pressure was recorded too.

After inflating the tire back up to 22 psi, the second test was a 6mm cut on the opposite side of the wheel (180 degrees from the last puncture). The wheels were once again ridden and the puncture seal time recorded.

You can read the AMB test HERE.

MTB Tire Puncture Test @ 25 psi (Bicycling.com)

The Bicycling test is the most scientific of the lot as they used a special test rig to accurately measure air pressure loss.

They used the same wheel and tire model, installed the manufacturer’s recommended amount of sealant, and inflated it to 25 psi. To consistently replicate punctures, they connected the wheel to a drill and had the wheel spun at 10 mph (16 kph) for each test.

They then punctured each tire with a 3mm and then a 4mm nail, which was ripped from its hole at 10mph. The wheel was spun for 30 seconds with the air pressure monitored via the Quarq TyreWiz app. The result you see is the air pressure loss after this time.

If the puncture hadn’t sealed after 30 seconds, they simply stopped the tire in the rig and let the sealant pool to stop the airflow.

You can see the Bicycling test HERE.

MTB Tire Puncture Test @ 20 psi (Singletracks.com)

Jeff at Singletracks went about his MTB tubeless sealant test in a slightly different way.

Jeff used a Vittoria Syerra tire mounted to a wheel with 4 oz / 120 ml of sealant. He inflated the tire to 20 psi, then poked a 3mm hole in the tire using a pick tool. Upon removing the pick, he spun the hole to the bottom and jiggled the tire a couple of times until the puncture began to seal.

Jeff then cycled for roughly one minute on a test track loop that included a three-foot jump, a short rock garden, multiple sharp corners, a large log roll, and finally a climb back to the top.

He measured the pressure in the tire using a digital gauge immediately after the test loop as well as after 10 minutes with the hole at the bottom. After the test, Jeff measured how much sealant was left inside the tire.

You can see the Singletracks test HERE.

MTB Tire Puncture Test @ 29 psi (Fiets.nl)

Fiets used a Maxxis Ikon mountain bike tire with the quantity of sealant recommended by the sealant manufacturer. They then inflated the tire to 2 bar / 29 psi and drilled precise holes in it.

Fiets acknowledges that drilling puts a perfectly round hole in the tire, which is usually not the case when you get a puncture (the tire tends to sever apart, leaving a few strands for the sealant to coagulate around). But this technique is acceptable as all sealants must close the same-sized holes.

They started with a 1 mm drill bit and gradually increased the hole diameters until the sealant could no longer close them. After each drilled hole they measured the lost pressure and reset the tire to 2 bar (29 psi).

You can see the Fiets test HERE.

MTB Tire Puncture Test @ 26.8 psi (Velo Vert)

Velo Vert used a Hutchinson Toro 2.1″ mountain bike tyre with the quantity of sealant recommended by the sealant manufacturer. They then inflated the tyre to 1.85 bar / 26.8 psi, took the measurement using a TireWiz, and spun the wheel for two minutes before the puncture test to ensure the sealant was well distributed inside the tyre.

They stabbed the tyre with a sharp 1.5mm object and pedalled the bike on a trainer for five minutes. They then measured the pressure loss. They repeated the process with a 3mm object and took a final pressure reading after three hours.

You can see the Velo Vert test HERE.

MTB Tire Puncture Test @ 29.0 psi (MTB Foligno)

MTB Foligno used a Maxxis Ardent 2.25″ mountain bike tire with 50ml of sealant installed (new sealant for each test). The tire was inflated to 2.0 bar / 29.0 psi, a puncture was made to the tire, and the pressure loss was recorded after the hole had been sealed.

These punctures were made using 1.3, 3.2mm and 5mm screwdrivers, as well as a 3 and 5mm drill bit. The 5mm drill bit could not be repaired by any sealant so I didn’t include this information in the table.

You can see the MTB Foligno test HERE.

Gravel Tire Puncture Test @ 40 psi (Off-Road.cc)

Off-Road.cc conducted their puncture tests on a Halo GXC gravel tire measuring in at 47 mm. The tire sealant is added in the amount suggested by the manufacturer, and the tire is inflated to 40 psi. The wheel is spun sufficiently to ensure the sealant is distributed evenly throughout each tire.

The tire’s carcass is then punctured with a 5mm diameter nail, and the remaining air pressure is measured with a digital pressure gauge.

You can see the Off-Road.cc tests HERE.

Road Bike Tire Puncture Test @ 87 psi (Fiets.nl)

Fiets used Mavic Yksion Pro UST road bike tire for this test. They inserted a nail with a 1.5 mm diameter, inflated the tire to 6 bar (87 psi), and removed the nail. They gave the wheel a good spin, waited for the puncture to seal, and later measured the pressure loss.

After the tires had repaired the 1.5 mm hole, they re-inflated them to 7 bar (101 psi), where only half of the sealants were able to withstand this pressure.

You can see the Fiets test HERE.

• Comfort Lab

I Found The Best Gravel Tires For Maximum Comfort, Speed and Grip

byKrzysztof Wierzbicki

February 19, 2025

• Comfort Lab

Lab Test: Lowering Your Tyre Pressure Will Greatly Improve Your Bike’s Comfort

byAlee Denham

April 6, 2021

• Bike Gear
• Gear

Bikepacking Tires: Which Brands And Models Are The Most Durable?

byAlee Denham

December 4, 2018

• Bike Gear
• Gear

What Is The Most Puncture Resistant Touring Tyre? Lab Testing Results

byAlee Denham

April 28, 2017

• Bike Gear
• Gear

What’s The Speed Difference Between Touring Tyres? Rolling Resistance Lab Testing

byAlee Denham

February 15, 2017

The post The 5 Best Tubeless Sealant Products According To Science (Lab Tests) appeared first on CYCLINGABOUT.com.

It has been designed by Cane Creek to be especially active over high-frequency dirt road chatter, which should smoothen out surface variations, and result in you enjoying bumpy roads that little bit more.

While the main purpose of the Invert is to improve the comfort and control of a gravel bike, it also has a better aesthetic compared to most gravel suspension forks available. The Invert’s thicker shape at the crown blends into the head tube, and the thinner shape at the bottom blends nicely into the dropouts.

Today, we’ll be covering all aspects of this unique carbon fork in a series of frequently asked questions.

What Are The Specs of the Cane Creek Invert Fork?

• Wheel Size: 700C
• Spring Type: Air
• Offset: 45mm
• Thru Axle: 12 x 100mm
• Weight: 990 to 1,113 grams
• Suspension Travel: 30 or 40mm
• Axle to Crown: 425 or 435 mm
• Steerer Tube Size: Tapered 1-1/8″ to 1-1/2”
• Brake Rotor: Flat Mount 160mm, or 180mm with an adapter
• Maximum Tire Width: 50mm (2.0”) with 6mm of clearance on either side

What is the Benefit of an Inverted Suspension Fork Design?

Inverted suspension forks can have a very high stiffness-to-weight ratio because the thickest and stiffest portion of the fork is located where leverage is greatest – near the head tube.

In addition, the seals and bushings are located at the bottom of the upper legs, which means they are always sitting in oil. This keeps things running smoothly, and the upside-down design also ensures that gravity can’t work any grit inside the sliding components.

There’s also less unsprung mass with inverted forks. This means that the section of the fork that’s constantly moving up and down is as light as possible, resulting in the fork being extra responsive to bumps.

An upside-down fork also has a better aesthetic for modern gravel bikes. Most gravel suspension forks look like trimmed-down mountain bike forks. In contrast, the Invert’s thicker shape at the top blends into the head tube, and the thinner shape at the bottom blends into the dropouts. It’s certainly more elegant than most suspension forks (except for the HiRide Sterra).

Aren’t Inverted Suspension Fork Stanctions Susceptible to Damage?

The stanchions are low to the ground and could be susceptible to damage should you fall sideways onto a rock. But the official word from Cane Creek is that they never had a single instance of scratching through the development process.

How is the Cane Creek Invert Fork Manufactured?

The structure itself is quite impressive.

To keep the fork less than one kilogram (2.2lbs), the fork uppers consist of a massive carbon fibre crown and steerer, which are both stiff and lightweight. The carbon components are then bonded to two aluminum upper legs post-molding. Aluminium is used in this instance to get the machining to the necessary manufacturing tolerances.

The fork lowers (stanctions and dropouts) are forged and machined out of single pieces of aluminium.

What is the Suspension Travel of the Cane Creek Invert?

The Invert has different suspension travel, depending on the model you choose:
Cane Creek Invert CS – 40mm travel
Cane Creek Invert SL – 30mm travel

Unfortunately, you must decide what travel amount you want at the time of purchase as both forks use different lengths of air springs.

How Much Does the Invert Gravel Fork Weigh Compared to Other Forks?

The Invert SL is 990 grams (2.2 lbs), which is just 470 grams (1 lb) heavier than a rigid carbon fork of similar length. With its longer travel and lockout switch, the Cane Creek Invert CS weighs in at 1,113 grams (2.5 lbs).

To put these numbers in perspective, here are some other suspension fork weights:
Lauf Grit SL – 960 grams
Cane Creek Invert SL – 990 grams
Cane Creek Invert CS – 1,113 grams
Fox 32 TC – 1,226 grams
HiRide Sterra – 1,300 grams
Rockshox Rudy – 1,317 grams
Cannondale Lefty Oliver – 1,340 grams
KS GTC – 1,385 grams
MRP Baxter – 1,420 grams
State All-Road – 1,600 grams
SR Suntour GVX – 1,628 grams

Does the Invert Gravel Suspension Fork Have A Lock Out Switch?

The Cane Creek Invert CS has a button at the crown that engages a firmer suspension setting. This is not a hard lockout, it just firms things up a lot.

It’s worth noting that it’s not possible to add a climbing switch to the SL as the fork upper is different.

Why Does The Invert Have No Damper?

The Cane Creek Invert doesn’t use a damper as it’s (a) short travel, and (b) primarily designed for non-technical terrain.

Suspension dampers control the speed at which your front wheel moves up or down. They prevent oscillations and movements by dissipating energy from the spring inside the fork.

Dampers tend to be essential on long-travel suspension forks (eg. 140mm) but are not strictly necessary with short-travel forks. In fact, when a fork doesn’t use a damper, you (the rider) can function as the damper on moderately rough, non-technical terrain.

Our Comfort Lab tests consistently find that the least-damped products are usually the most effective at reducing high-frequency vibration over fast, repetitive bumps. This is because the spring can move up and down almost unimpeded when there is no damper, maximising rider comfort at the handlebar.

The best comfort-improving products we’ve tested include the Kinekt suspension stem (no damping) and Specialized FutureShock (minimal damping).

Can You Ride The Invert Fork On Singletrack?

The downside to not having a damper is that the fork cannot remove as much energy after bigger impacts. This alone makes this fork better for gravel roads rather than bumpy singletrack trails.

You can expect this fork to feel a bit less ‘planted’ on rougher terrain compared to a suspension fork with a damper.

Does the Cane Creek Invert Top Out?

BikeRumor reports that after bunny hopping over an obstacle the “fork rebounds at full speed” and that they could “hear and feel the top out”. It didn’t seem to be a big deal to them, but it was “definitely noticeable”.

How Do You Change the Spring Rate?

You can change the spring rate using a standard shock pump. Cane Creek recommends starting with 95% of your body weight (lbs/psi). That means a 200 lb rider would require 190 psi.

Are There Any Other Adjustments You Can Make?

There is no compression or rebound speed adjustment. But you can adjust the progressivity of the spring.

Three volume spacers can changed inside the fork depending on how quickly you want the firmness to ramp up before the fork bottoms out. These should be changed per the surface roughness of the roads you ride, and your riding style.

More aggressive riders will likely want more volume spacers for more progressivity.

What is the Price of the Cane Creek Invert Suspension Fork?

Invert CS with the climb switch and 40mm travel: US $1,199 / AU $2,034 / £1,200 / €TBC
Invert SL with no climb switch and 30mm travel: US $1,099 / AU $1848 / £1,100 / €TBC

What is the Maximum Rider Weight?

You can weigh up to 113kg/250lbs and use the Cane Creek Invert suspension fork.

Does the Cane Creek Invert Gravel Fork Require Servicing?

The Invert requires regular maintenance like most suspension forks.

Cane Creek recommends replacing the oil inside the fork every 50 hours of use. This can be done at home with a basic 12-notch, 46mm bottom bracket spanner tool (Race Face Cinch or SRAM DUB). The service procedure involves draining the oil and wiping everything clean, which supposedly takes minutes. Each leg requires just 5 ml of 15 wt oil.

Every 100 hours Cane Creek recommends a full rebuild. This must be done by Cane Creek, or at one of their service centres located all around the globe.

What’s the Warranty on Cane Creek Suspension Forks?

The warranty lasts two years from the date of purchase, and it covers materials and workmanship. Like other suspension products, by not performing regular services you can void the warranty.

Where is the Cane Creek Invert Manufactured?

Production parts are made in Taiwan before being sent back and assembled at their facility in Fletcher, North Carolina (USA).

What’s The Axle-To-Crown Length of the Invert Fork?

This fork is longer than many carbon rigid gravel forks.

The Axle-to-Crown (ATC) is 425mm for the Invert SL (30mm travel) and 435mm for the Invert CS (40mm travel).

If you install Invert on a bike with an ATC of less than 420mm, be aware that the fork will raise the front end of the bike, shorten the effective reach to the handlebars, and slacken the head tube angle.

If your bike has a very low ATC (less than 400mm), the Invert SL will affect your bike’s geometry less as it’s the shortest-length fork.

What Gravel Bikes Are Suspension-Corrected For the Invert Fork?

For a list of suspension-corrected gravel bikes, click HERE.

What Gravel Frames Fit the Invert Fork?

The Cane Creek Invert fork fits gravel frames with a standard tapered 1-1/8” to 1-1/2” fork. Most gravel bikes in 2024 are compatible with standard tapered forks.

When Will The Cane Creek Invert Be Available?

Cane Creek says the Invert fork will be available from June/July 2024.

The post The Cane Creek Invert is a 990g Gravel Suspension Fork With No Damper appeared first on CYCLINGABOUT.com.

But vibration test data coming out of the CYCLINGABOUT Comfort Lab show that these stems are very effective at reducing the jarring impact of bumps, potholes, and rough roads.

Not only are suspension stems comfortable, but they are also lightweight, reliable, and able to be installed on almost any bike. I’ve even found these stems to be hugely beneficial on bicycles with very wide tyres.

In this article, we will examine the advantages and disadvantages of suspension stems. I will then explain the different spring and linkage designs, and finally, I’ll tell you about the best products available. I’ll be lumping the Specialized Future Shock into this article too, as it functions similarly.

Let’s start with the advantages of suspension stems when compared to rigid stems.

Suspension Stem Advantages (Compared to Rigid Stems)

Vibrations coming up from the road dissipate in your body causing fatigue. This manifests as discomfort including muscle soreness, hand numbness, and neck and shoulder pain.

A suspension stem increases your comfort by removing a significant portion of these vibrations. Our tests with an accelerometer show a vibration reduction of up to 30% over a rigid stem. Keep in mind that vibration exposure is greater on longer rides, so the more time you spend on your bike, the more comfort you have to gain.

Suspension stems also reduce the impact force on your hands. This means you don’t need to grip your bars as tight over bumps, allowing for more effortless braking and control.

These stems might even make your bike faster. This is because the stem can absorb more of a bump, minimising your upper body movement.

A great thing about suspension stems is that they can fit all bikes. You can simply remove your rigid stem, and swap one in.

Ok, let’s now look at the advantages suspension stems have over suspension forks.

Suspension Stem Advantages (Compared to Suspension Forks)

Suspension stems are often better than forks at absorbing the high-frequency vibration that you experience on fast gravel roads. This is because they require very little damping, which allows them to move virtually uninhibited over fast, repetitive bumps.

They also require virtually no maintenance, and their performance doesn’t deteriorate over time. In comparison, more complex suspension forks require regular servicing to ensure they function well.

Suspension stems are lightweight too, typically adding just 100 or 200 grams to a rigid bike, whereas a suspension fork often adds a full kilogram (2.2lb).

At US $100 to $300, suspension stems are a relatively cheap upgrade. Consider that good suspension forks start at US $400 and max out at over $1500!

There is also no measurable loss in power transfer when you accelerate. In comparison, suspension forks are stimulated on every pedal stroke, losing energy from the system.

These stems are a notably aerodynamic way to achieve suspension on a bicycle. Round suspension fork legs simply don’t slice through the air as effectively as a bladed rigid fork.

And lastly, swapping out a stem is much quicker than changing a fork. This is a useful advantage if you only need suspension on your bike very occasionally.

With the advantages all laid out, suspension stems are looking pretty great. So, what are the downsides?

Suspension Stem Disadvantages (Compared To Rigid Stems)

Most suspension stems bob up and down a bit while you ride. But given the 10 to 20mm range of motion, it’s not usually a big deal.

It’s worth noting that suspension stems activate much less than you’d think while sprinting, as you tend to pull up and push down on the bars at the same time.

Suspension stems are not available in super short lengths. This is a packaging issue – the pivot must be between the steerer and the handlebar. Currently, the shortest stems available are 70mm long.

And lastly, suspension stems are not exactly elegant – especially the highest-performing models. But I suspect those who are sensitive to bike aesthetics are probably not reading this article.

Let’s now discuss the disadvantages when compared to a suspension fork.

Suspension Stem Disadvantages (Compared to Suspension Forks)

Over rough terrain, a suspension stem does not offer the same level of grip or bike stability as a suspension fork.

This is because they use much less advanced dampers, they have much less tunability, and they only suspend your upper body (rather than the entire front of your bike). They also have significantly less suspension travel, which means they cannot absorb as much energy after a bigger impact.

As a result, suspension stems are simply no match when it comes to off-road performance.

Now that you understand the advantages and disadvantages of these stems, let’s get into the nitty gritty of their design.

Suspension Stem Designs

Single pivot stems are the lightest, sleekest, and most simple design. These stems offer great performance, as the internal spring is usually very responsive, resulting in great vibration damping on fast gravel roads.

There are a few downsides, however.

Firstly, the amount of leverage you apply to the spring is different depending on where you place your hands. This means that while the stem might feel supple in the brake hoods, it might be too stiff once you’ve moved to the bar tops or drops.

Secondly, the distance your hands are forward of the pivot point determines the suspension travel. This design quirk means that those with shorter stems miss out on some travel. It also means that single-pivot stems are best paired with drop bars, as your hands are far enough forward (at the brake hoods) to unlock the full suspension travel.

Thirdly, these stems pivot in an arc, which results in your brake and shift levers tilting forward under compression. This characteristic feels a bit strange but can be somewhat accounted for by tilting your handlebars up.

And lastly, single-pivot stems don’t accommodate sweptback handlebars well. This is because your hands simply end up too close to the pivot point.

A multi-pivot stem solves most of these issues. They require the same amount of force to activate them, no matter where you place your hands. In addition, all stem lengths offer the same amount of travel, the bar angle remains consistent under compression, and they all suit sweptback bars.

The downside is that these stems have four bearings, which might develop small amounts of play long term. They also aren’t that pretty and add some weight.

Let’s now look at the two different spring types.

Spring Types

First up we have coil springs.

According to our tests, these springs consistently offer the highest level of comfort because they move up and down almost uninhibited. This very effectively smoothens out the high-frequency chatter you experience on fast gravel roads.

The downside to a very active spring is that it can feel ‘bouncy’ when you ride hard. It can also make your handlebars feel a bit disconnected from the ground below.

Elastomer springs are the other option.

These springs have more material damping, which not only makes them less bouncy overall but gives them a better feel. While they can’t match the high-frequency vibration damping of a coil spring, they are equally as good at absorbing bigger hits.

A downside to elastomer springs is that they can firm up in below-freezing conditions. That said, this is not considered significant until it’s ridiculously cold – Redshift says that’s at -40F/-40C.

Ok, you’re almost an expert on suspension stems now, so let’s take a close look at the best suspension stems available.

I’m going to link through to some online stores below that will give CYCLINGABOUT a small commission on any sales. If you want to support this content, this is an excellent way to do so!

Best Suspension Stem #1: Kinekt

Linkage: Multi Pivot
Spring Type: Coil
Length: 90 to 120mm
Min Weight: 470 g / 16.6 oz
Travel: 20mm / 0.8″
Bar Clamp: 31.8mm

$189 AT AMAZON

$189 AT AVENTURON

The Kinekt suspension stem is the most comfortable model we have tested in the CyclingAbout Comfort Lab. It uses a fast-moving coil spring with 20mm of travel and employs a multi-pivot layout so that you get great performance no matter where you place your hands.

While it’s a top performer, this stem can feel a bit bouncy and vague at times. It can also make a small knocking sound after it tops out after large impacts. As a result, this stem is usually best for those with an upright riding position, or those who ride at a more relaxed pace.

The Kinekt stem comes with three spring rates to adjust to your body weight, riding style, and terrain. It’s notably stiff torsionally and is available in an array of rises and lengths, including some super-tall models for those looking for a bit more bar height.

Kinekt Suspension in 90-105-120mm with 7° angle:
$189 at Amazon
$189 at Aventuron (90mm)
$189 at Aventuron (105mm)
$189 at Aventuron (120mm)

Kinekt Suspension in 100mm with high 30° angle:
$189 at Amazon
$189 at Aventuron
$189 at REI

Kinket Stem in 100mm with very high 50° angle:
$189 at Amazon
$189 at Aventuron

Best Suspension Stem #2: Vecnum Freeqence

Linkage: Multi Pivot
Spring Type: Elastomer
Length: 90 to 120mm
Min Weight: 287 g / 10.1 oz
Travel: 20mm / 0.8″
Bar Clamp: 31.8mm

€299 AT VECNUM

The Vecnum Freeqence is another multi-pivot stem with 20mm of travel that appears similar to the Kinekt. There are a few key differences, however.

The Freeqence uses an elastomer spring that not only has the best feel of any stem but it isn’t ever bouncy. It also has 10mm of upward travel that eliminates ‘top out’ entirely. These characteristics allow the stem to instantly fade into the background while you ride.

One of the greatest things about the Freeqence is that you can adjust the spring rate for a 50 to 120 kg rider just by using an Allen key on the side (110 to 265 lb). This is not quite an on-the-fly adjustment, but it’s close enough – no other stem provides this easy adjustability.

The Freeqence is also 40% lighter than the Kinekt stems, however, this pursuit of lightness can be to its detriment should you ride with a flat handlebar, as it has noticeably less torsional stiffness. The stem is also rather expensive due to the extensive machining and titanium axles, and I’ve found it to be less active than I’d like over fast, repetitive bumps.

Nonetheless, this stem has the least amount of compromises for my use, so this is what I’m currently using on my five-year bike journey around Africa.

Best Suspension Stem #3: Redshift ShockStop

Linkage: Single Pivot
Spring Type: Elastomer
Length: 80 to 120mm
Min Weight: 220 g / 7.8 oz
Travel: 20mm / 0.8″
Bar Clamp: 31.8mm

$189 AT AMAZON

$189 AT ANGRY CATFISH

The Redshift elastomer stem is a proven performer, with a 20%+ reduction in vibrations compared to a regular stem. Krzysztof currently uses a Redshift as a comfort benchmark in our vibration tests.

The ShockStop is a single-pivot design, making it best suited to drop bar bikes where you can place your hands in the brake hoods.

This stem is very stiff laterally and it has a fast spring rate to damp high-frequency vibration. It’s very adjustable too; you get five different elastomers that will give you 15 different possible spring stiffnesses.

Unlike other stems, you can run the Redshift with a positive or negative rise. That said, I didn’t enjoy using the negative rise setup, as the direction of force coming from the ground is different from the stem’s movement – the stem feels best in the positive orientation.

The Redshift comes in lengths from 80 to 120mm in both 1 1/8” and 1 1/4” sizes. There’s also a high-rise version available in two lengths, and a $249 Pro version that cuts 15% from the stem weight.

Redshift ShockStop in 80-90-100-110-120mm with 6° angle:
$189 at Amazon
$189 at Angry Catfish
$189 at Competitive Cyclist
$189 at REI

Redshift ShockStop in 80-100mm with high 30° angle:
$189 at Amazon
$189 at Angry Catfish
$189 at Competitive Cyclist
$189 at REI

Redshift ShockStop Pro Lightweight in 80-90-100-110-120mm:
$249 at Amazon
$249 at Angry Catfish
$249 at Competitive Cyclist

Best Suspension Stem #4: Cane Creek eeSilk

Linkage: Single Pivot
Spring Type: Elastomer
Length: 70 to 100mm
Min Weight: 225 g / 7.9 oz
Travel: 20mm / 0.8″
Bar Clamp: 31.8mm

$229 AT ANGRY CATFISH

$229 AT REI

Cane Creek offers a single-pivot elastomer stem that’s very similar to the Redshift, but this one comes with a soft-to-firm switch!

When it’s rough, run it unlocked, and when it’s smooth – stiffen it up. You can run a softer spring rate than usual as you don’t need to compromise for all riding situations.

If you prefer a cleaner look, the Cane Creek is also available without the lockout switch. Both models are available in 70, 80, 90, or 100mm lengths.

Cane Creek makes it easy to change between the three spring rates. You don’t need to remove the handlebar like you do with the Redshift stem – undoing just one bolt allows you to swap in a softer or firmer elastomer.

Unfortunately, the Cane Creek can only be used in the negative orientation, which again, is not optimal as the stem moves in a different direction from the forces coming up from the ground.

Cane Creek eeSilk in 70-80-90-100mm lengths with switch:
$229 at Angry Catfish
$229 at Backcountry
$229 at Competitive Cyclist
$229 at REI

Cane Creek eeSilk in 70-80-90-100mm lengths:
$199 at Backcountry
$199 at Competitive Cyclist

Specialized Future Shock

The last product I want to show you is the Future Shock, which is only available on Specialized gravel and endurance road bikes.

This 20mm travel suspension element uses a sensitive coil spring just like the Kinekt stem, but it additionally has a hydraulic cartridge damper inside to control the spring speed. This product not only feels great, but it has a compression dial that allows you to quickly adjust the firmness from completely open to locked out.

The reason why I wanted to include the Future Shock in this article is that it offers the most gravel road comfort of any front suspension products we’ve tested, and that includes suspension forks too.

On a bumpy forest trail, we found the Future Shock could attenuate 6% more vibration than a bike fitted with both a Lauf suspension fork AND a Redshift suspension stem. On a fast gravel road, the Future Shock absorbed almost 20% more vibrations! This is an amazing result given we already know the Redshift stem is leaps and bounds more comfortable than a rigid stem.

We’ve so far found the Future Shock to be the holy grail in terms of performance, adjustability, lock-out, and aesthetics. A bonus is that it can even fit stems shorter than 70mm.

But the downside to this high-tech solution is that it’s only available on some Specialized bikes, and the complexity results in more servicing requirements, potential points of failure, and in the future, the inability to obtain spare parts.

Let’s finish up with a few quick frequently asked questions.

Suspension Stem FAQs

Can you combine suspension forks and suspension stems?

Suspension stems deflect just 10 to 20mm, so this movement will have a minimal effect on the handling of your bike. If you want better vibration damping on a fast gravel road, or you feel the need for a small boost in suspension travel, a suspension stem would do that for you.

Can you use front luggage with suspension stems?

You can use a front bag with a suspension stem but you will need to compensate by using a stiffer spring.

Do suspension stems work on a quill stem bike?

Yes, you can fit them with an adapter.

Are there any stems under $100?

Linkage: Multi Pivot
Spring Type: Coil
Length: 90mm
Min Weight: 485 g / 17.1 oz
Travel: 20mm / 0.8″
Bar Clamp: 31.8mm

$85 AT AMAZON

You can find generic coil-spring, multi-pivot stems sold under many names including Meroca, Bibike, and JFOYH.

These stems are not the best choice if you’re planning on riding hard, as they tend to top and bottom out on rough terrain, making a clunking sound. But if your riding position is upright and your riding style is relaxed, they should offer decent performance – especially for the price.

Just note that there is a single length available with these stems (90mm).

The TranzX Antishock is another cheap stem. However, this model has been lab-tested to be ineffective, so it’s best to skip it.

Summary

I originally expected suspension stems to be a gimmick, but ultimately, I’ve found them to increase the fun and enjoyment of cycling by way of a comfort boost – and you will appreciate that on longer rides. As a result, I can only recommend you try one.

There are trade-offs to coil and elastomer springs, as well as single-pivot and multi-pivot stem designs. Make sure to carefully examine the pros and cons of each design to find the product that best suits your needs.

The post Why Suspension Stems Are The Ultimate Comfort Upgrade For Bicycles appeared first on CYCLINGABOUT.com.

• Best Rear Rack Overall: Tubus Logo Classic
• Best For Full Suspension Bikes: Old Man Mountain Divide
• Best Carbon Fiber Rack: Tailfin Carbon Rack
• Best For Easy Take Off: Ortlieb Quick Rack
• Best Bikepacking Minimalist Rack: Tubus Vega Classic
• Best Titanium Rack: Tubus Airy
• Best For Using Cargo Cages: Tumbleweed Mini Pannier Rack
• Best Bombproof Rack For Very Wide Tires: Surly Rear Rack
• Best Bombproof Rack For Wide Tires: Tubus Grand Tourer
• Best Budget Rack: Iberia RA5

The Long Version

Racks are one of the most likely components to fail on a bicycle trip. The good news is that when you pick the right rack, you almost certainly won’t get stranded in the middle of nowhere. The best rear racks will last a lifetime, so invest once and get it right – and you’ll never have to do it again.

To start, it’s crucial to consider which models will fit on your bike. Some racks attach only via dedicated rack eyelets on the rear triangle of your frame. Other racks have ‘fit kits’, making them almost universal.

Some racks have very high weight capacities, so if you are planning on an around-the-world trip, a rack with a high capacity and stiffness will be the go (you never know when you need to strap a couple of gallons of water to your bike).

We will also be showcasing lots of lightweight racks, heavy-duty racks, and racks that fit wide tires.

Note: We may earn a commission when you purchase a rack through our links. This directly supports CYCLINGABOUT and allows us to continue to provide high-quality cycling information to you.

Need To Know What To Look Out For?

To learn about the key features of racks along with specific details to look for, check out the Buying Advice section at the bottom. This includes lots of handy information to assist you in making the right purchase choice.

Jump to Buying Advice

The Best Rear Racks

Tubus Logo Classic

Best Rear Rack Overall

Price: $185 ($$$)

Weight Capacity: 57.3lbs / 26kg

Rack Weight: 1.38lbs / 630g

Tire Clearance: 29 x 2.35″

The Tubus Logo Classic is perhaps the most well-regarded rack in the world, in fact, the author of this website has used Tubus Logo racks for over 100,000mi (160,000km) of touring around the world!

The steel Logo is built narrower than most racks and hangs your panniers one level lower; lowering the center of gravity and improving your bike’s stability. These dedicated pannier rails additionally provide clearance above the panniers for a dry bag, or “rack pack” on the top platform.

If your bike frame has short chain stays, or you have big feet, the Logo puts your panniers extra far back to gain heel clearance. This makes the Logo great for gravel bikes that tend to have shorter chain stays than usual.

The rack comes in two different sizes: one for 26″/700C wheels and one for 27.5/29″ wheels. If in doubt, simply go for the Logo 29 model (it’s an inch taller). We have fitted 27.5 x 2.6″ tires into the Logo 29 rack with enough clearance on either side.

Here’s the cool thing about Tubus – they make racks, and that’s it! They have been rack specialists for over 30 years, and are so confident in their product that they back all their racks with a 3-year mobile warranty. This means that if you experience a failure within the first three years of use, Tubus will ship you replacement parts anywhere in the world. That’s unbeatable peace of mind for a bike traveler, and it’s followed up with a 10-year regular warranty.

You can fit the Tubus Logo to some bikes without rack mounts. If your rear wheel axle is quick-release, you can use the Tubus Adapter Set for the lower mounts, and a Salsa Rack Lock seatpost clamp for the upper struts.

	Tubus Logo Classic Black	Tubus Logo Classic Silver	Tubus Logo 29 Black
	See Price	See Price	See Price
	See Price	See Price	See Price

Old Man Mountain Divide

Best For Full Suspension Bikes

Price: $168 ($$$)

Weight Capacity: 70lbs / 31.8kg when axle-mounted

Rack Weight: 2.1lbs / 960g

Tire Clearance: 29 x 3.0″

What sets the Old Man Mountain rack apart is its adaptability. Unlike traditional racks, its compatible with a wide range of bikes including full-suspension bikes. The innovative attachment system means you don’t need rack mounts, making it incredibly versatile and easy to install.

This rack’s solid construction guarantees stability under heavy loads, and the low pannier rails and height adjustability keep your bike feeling nimble over rough terrain thanks to a reduced center of gravity.

The Old Man Mountain Divide has a notably spacious platform on top to cinch down an extra large dry bag. It’s one versatile rack that provides ample flexibility for your next off-road adventure.

There are two models to choose from. The Regular will suit tires up to 3.0″ wide, while the Fat is designed around tires between 3.0″ to 5.0″!

The only notable downside is that with so many fit kit options, it can be a bit complicated to figure out which one to order. Make sure to check out the Old Man Mountain website, which will help guide you through the steps.

	Old Man Mountain Divide (3.0″)	Old Man Mountain Divide Fat (5.0″)
	See Price	See Price

Tailfin Carbon Rack

Best Carbon Fiber

Price: $465 ($$$$$)

Weight Capacity: 59.5lbs / 27kg

Rack Weight: 11.8oz / 335g (with pannier mounts fitted)

Tire Clearance: 29 x 2.9″

Tailfin’s unique ultralight racks have brought a new perspective to bike travel.

Their modular packing system is based on a lightweight rack that is compatible with 99% of bikes on the market. The mounting design lets you attach a rack to your seat post and thru-axle (or via traditional threaded rack mounts if you have them). Once you initially install the hardware, you can then take the rack on and off in seconds.

A Tailfin rack can be used to mount any of Tailfin’s extensive line of specially designed panniers and bags – we especially like the Tailfin AP20 Trunk Bag and various panniers. Alternatively, if you already have a favorite pannier set, you can fit them too with the right adapters.

There is great heel clearance on this model, and it’s full-suspension compatible thanks to its special pivot design. In addition, it can clear wide off-road tires to the tune of 26×4.0, 27.5×3.5, and 29×2.9.

If you like this rack concept but the carbon model is too expensive, a heavier alloy version drops the price by a third, and offers cargo cage mounts for additional bag options. A cool thing is that Tailfin products are designed to be modular, so if you initially purchased the alloy rack you can later buy carbon arch and top stay, and switch over to a lighter rack.

	Tailfin Carbon Rack	Tailfin Alloy Rack
	See Price	See Price

Ortlieb Quick Rack

Best For Easy Take Off

Price: $100 ($$)

Weight Capacity: 44.1lbs / 20kg

Rack Weight: 1.2lbs / 580g

Tire Clearance: 2.35″

Ortlieb is synonymous with rugged bike travel thanks to their durable panniers that have been a bike travel staple for over 40 years. Recently they have brought their German engineering and durability to the lightweight bike rack market.

The Ortlieb Quick Rack quickly transforms whatever bike you have into a bike for short tours or around-town errands. Similar to the Tailfin, it fits 99% of bikes on the market, and once you do the initial hardware attachment, it takes just seconds to fit or remove the rack.

There are two versions of the Quick Rack. The regular model has a platform on top if you want to cinch down a dry bag or fit a “rack pack”. If you are only using panniers, the Quick Rack Light will be the go. It eliminates the upper platform, which reduces the weight by 5.3 oz (150 g).

The Quick Racks are also compatible with Ortlieb’s vast line of panniers. It’s important to remember that this rack isn’t a replacement for a permanent rack, and it’s vital to stick to the weight capacity, or you can risk damage or breakage.

	Ortlieb Quick Rack (Platform)	Ortlieb Quick Rack Light (No Platform)
	See Price	See Price

Tubus Vega Classic

Best Minimalist Rack

Price: $150 ($$$)

Weight Capacity: 55lbs / 25kg

Rack Weight: 1.2lbs / 540g

Tire Clearance: 2.35″

The Tubus Vega is the sleeker and lighter alternative to the Logo (featured above). By omitting the lower pannier rails of the Logo, the Vega can be built lighter while maintaining a very respectable load capacity.

Built on Tubus’ legacy of engineering, the Vega exemplifies reliability, making it an ideal choice for moderate loads. Whether you opt for a dry bag on top of the rack, panniers, or both – the Vega accommodates the usual gear configurations with ease.

As it uses the upper platform of the rack for mounting panniers, you get some extra ground clearance compared to other racks for navigating challenging terrain.

The rack comes in two different sizes: one for 26″/700C wheels and one for 27.5/29″ wheels. If in doubt, simply go for the Vega 29 model (it’s an inch taller). We have fitted 27.5 x 2.8″ tires into the Vega 29 rack with enough clearance on either side.

Like all Tubus racks, if you experience a failure within the first three years of use, Tubus will ship you replacement parts anywhere in the world. This is unbeatable peace of mind for a bike traveler!

You can fit the Tubus Vega to some bikes without rack mounts. If your rear wheel axle is quick-release, you can use the Tubus Adapter Set for the lower mounts, and a Salsa Rack Lock seatpost clamp for the upper struts.

	Tubus Vega Classic 26″ or 700C Black	Tubus Vega Classic 29″ Black
	See Price	See Price

Tubus Airy

Best Titanium Rack

Price: $399 ($$$$$)

Weight Capacity: 57.3lbs / 26kg

Rack Weight: 12.7oz / 360g

Tire Clearance: 700 x 47mm

The Tubus Airy boasts an irresistible coolness factor, proudly holding the title as the pioneering titanium rack in the market. Its titanium build strikes an impeccable balance between featherlight design and unwavering durability.

Despite its remarkable lightweight nature, the Airy stands strong and is capable of handling impressive loads. It’s rated to carry 57.3 lbs (26 kg) while tipping the scales at a mere 12.7 oz (360 grams). Yep, it can carry 72 times its weight!

For those meticulously counting every gram yet wanting the flexibility to use any type of pannier (or secure a dry bag on top), this rack fits the bill perfectly.

Moreover, any travel-induced scratches or blemishes on your Airy can be easily buffed out. This makes the Airy not just strong but forever new-looking.

You can fit the Tubus Airy to some bikes without rack mounts. If your rear wheel axle is quick-release, you can use the Tubus Adapter Set for the lower mounts, and a Salsa Rack Lock seatpost clamp for the upper struts.

	Tubus Airy Titanium
	See Price

Tumbleweed Mini Pannier Rack

Best Rack For Cargo Cages

Price: $139 ($$$)

Weight Capacity: 66lbs / 30kg

Rack Weight: 12.7oz / 660g

Tire Clearance: 29 x 3.5″

As the 2020 Bikepacking.com Gear of the Year Award recipient, this rack stands out as an excellent choice for adventure cyclists – this steel rack can withstand proper off-road terrain.

The steel Mini Pannier Rack has triple boss mounts on the legs so you can mount cargo cages, or water bottle cages with expandable capacity for trips like the Baja Divide. The platform on the top is generously large (12″ x 5″), which will be perfect for cinching down an extra-large dry bag.

Despite its versatility, the Mini Pannier Rack isn’t for everyone – it’s best paired with mini bikepacking panniers that match the small surface area of the rack. You will also have to have threaded bosses on your frame to mount this rack (it’s not thru-axle compatible).

It’s worth noting there is another Tumbleweed rack model called the T Rack, which is an extra-minimalist version that’s not intended to fit panniers. Instead, you will be using cargo cages for your luggage on the sides, and the top platform will be a great substitute for a bikepacking seat pack.

Both racks have notably large tire clearance for up to 26 x 4.75” or 29 x 3.5″.

	Tumbleweed Mini Pannier Rack	Tumbleweed T Rack
	See Price	See Price

Surly Rear Rack

Best Bombproof Rack For Very Wide Tyres

Price: $155 ($$$)

Weight Capacity: 80lbs / 36kg

Rack Weight: 2.78lbs / 1.26kg

Tire Clearance: 29 x 3.0″

On the hunt for an ultra-durable rack with wide tire clearance? Look no further. The Surly rear rack is the epitome of robustness, boasting an impressive maximum weight limit that embodies Surly’s reputation for durability.

What distinguishes the Surly Rear rack from Tubus options is its height adjustability. This feature ensures compatibility with various tire sizes and also helps keep your weight and center of gravity as low as possible for improved stability.

This steel rack comes in black or silver and tips the scales at almost three pounds making it the heaviest contender on our list. However, keep in mind its 80-pound (36kg) weight capacity surpasses most bike racks – your legs will probably give out before this rack does.

	Surly Rear Rack Black	Surly Rear Rack Silver
	See Price	See Price
	See Price	See Price
	See Price	See Price
	See Price	See Price
	See Price	See Price

Tubus Grand Tour

Best Bombproof Rack For Wide Tyres

Price: $255 ($$$$)

Weight Capacity: 88lbs / 40kg

Rack Weight: 1.68lbs / 760g

Tire Clearance: 29 x 2.35″

The ultimate round-the-world touring rack is the Tubus Grand Tour. This steel rack has the highest weight capacity of any rack here, and all in a package that’s 40% lighter than the Surly Rear Rack!

There are finer details on the Grand Tour that make it a bit more expensive too, such as the lower mounting points (3D printed) that do not require any additional spacers, even with disc brakes.

Your panniers will sit nice and low on the Grand Tour as it uses dedicated rails, keeping your center of gravity in check.

Like all Tubus racks, if you experience a failure within the first three years of use, Tubus will ship you replacement parts anywhere in the world. This is unbeatable peace of mind for a bike traveler!

We would award this rack the best overall, but the Logo Classic simply offers better value for money.

	Tubus Grand Tour Black
	See Price
	See Price

Ibera RA5 Rack

Best Budget Rack

Price: $50 ($)

Weight Capacity: 55lbs / 25kg

Rack Weight: 1.68lbs / 760g

Tire Clearance: 29 x 2.6″

The Ibera might be a budget-friendly pick, but it doesn’t miss out on any features.

It’s height adjustable and has lower pannier rails to can keep the center of gravity of your panniers nice and low. The pannier rails are also set further back, which means it will offer excellent heel clearance.

In addition, this rack has clearance for seat stay disc brake calipers and has pins on the rack so that your panniers won’t slide on the rails.

The Ibera RA5 is not a rack for long-term heavy-duty use though – it’s built to a price. If you are planning a long trip, the extra money spent on a more durable rack will be well worth it.

It’s important to keep in mind that there’s a plethora of budget bike racks out there for even cheaper, but inexpensive racks very rarely last the distance. The Ibera is the cheapest model we are comfortable recommending.

	Ibera RA5
	See Price

Rear Bike Rack Buying Advice

Rack Material

Steel – Most of the racks on this list are made of steel. Steel provides a great nexus between durability, load capacity, and weight – all at a reasonable price point.

Aluminum – This material is a hit-and-miss for racks. The best aluminum racks are very stiff, very durable, and will last a lifetime. However, far too many rack brands use aluminum that is too soft (or they forgo durable surface treatments), resulting in failures and giving the material a bad name. Needless to say, we have picked out durable aluminum models only.

Carbon Fiber or Titanium – If you want a particularly lightweight setup or have an eye on aesthetics, titanium or carbon fiber racks could fit the bill. Even though they are made from lightweight materials, the racks on this list won’t sacrifice durability one bit. That said, you will be paying for this pleasure.

Attachment Style

Threaded Frame Mounts – Threaded frame eyelets are the most common way to fit a rear rack. In the past, these mounts were the only way to attach a rear rack – now, there are many other solutions.

Axle Mounts – Not all bikes have lower frame mounts. Mounting a rack directly to the axle is a great way to maximize the weight capacity of a rear rack as it allows for a very stiff structure. The Tailfin and Old Man Mountain racks are great examples of axle mounts done right, and Tubus racks can be attached via the axle using a special mounting kit.

Seat Post Mounts – Some racks employ special quick-release clamps that will lock on the seat post. This allows for the easy attachment and removal of a rack – the Ortlieb and Tailfin racks are prime examples. It’s worth noting you can also mount most racks to your seat collar – Salsa makes some nice collars with built-in eyelets.

Seat Stay Mounts – These upper mounts connect directly to the seat stays of the frame, and will work on full-suspension bikes.

Weight Capacity

Sticking to the weight limit set by the manufacturer will ensure your rack lasts a lifetime. If you do exceed this limit, it’s much more likely your rack will bend and break, especially on rough roads.

Even if you don’t plan to exceed the manufacturer’s limits, higher-weight capacity racks are significantly stiffer (with less side-to-side sway) and will be more reliable in the long term.

Tire Clearance

You will need to make sure your rack can comfortably fit your tire width. This is especially important if you’re riding off-road, as mud, grit, and rocks can jam in between the rack and tire.

We have listed the maximum tire widths for all racks here to make sure this doesn’t happen.

Rack Height

A shorter rack height helps keep your pannier’s center of gravity low, so your bike is easier to handle over rough and varying surfaces. Some racks like the Tubus Logo feature extra low rails for your panniers, which helps reduce the bag’s center of gravity even further.

Rack Pannier Support Area

The ‘pannier support area’ is the surface that the pannier sits on. With a larger rack surface area for your panniers to rest on, they will be extra supported, twisting less and putting less stress on your pannier hooks.

Please note that the pannier support area can be quite small on some of the more minimal racks (eg. Tumbleweed). It’s best to use smaller panniers on racks with this characteristic.

Upper Rack Mounting Struts

If you use a smaller bike frame, you may need to find longer upper struts for your rack. We have made sure to select racks with extra long struts available.

They’re available in 240mm, and 350mm lengths from Tubus. Surly has aftermarket upper struts that are 300mm in length. Ibera sells 280mm struts, and Tumbleweed includes 300mm upper mounting struts with their racks.

Rack Heel Clearance

If the chain stays on your bike are on the shorter side (440 mm or shorter), or you have particularly large feet, you may need a rack designed for extra heel clearance.

We have many racks listed here that shift your panniers further rearward (eg. Tubus Logo or Tailfin), and we also have a separate article on ten racks that provide additional heel clearance HERE.

Disc Brakes

If your bike uses a rear disc brake on the top of the seat stay, you will need to determine if a rack is capable of clearing the caliper. We’ve tried to pick only disc brake-suitable racks, but sometimes you’ll need to use a foot extension set like this one from Tubus.

It’s worth noting that any of the axle-mounted racks will clear brake calipers just fine.

Full Suspension Bikes

Fitting a rack to a full-suspension bike is tricky because the rack needs to move up and down with the rear wheel.

Tailfin racks have a unique pivot design that allows the rack to move with the suspension but still connect to the main frame via the seat post.

A rack on a full suspension bike can alternatively attach to the seat stays and rear axle. The Old Man Mountain rack is designed to be mounted in this manner, so it won’t interfere with your rear wheel’s movement.

The post The 10 Best Rear Racks for Bicycle Touring and Bikepacking appeared first on CYCLINGABOUT.com.